A356 Al
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
AA7075 alloy
Effect of carbonaceous hybrid reinforcement and extrusion temperature on the microstructure and mechanical properties of AA7075 matrix hybrid composite prepared by semi-solid casting [Volume 8, Issue 1, 2021, Pages 1339-1352]
ABAQUS
Three dimensional modeling of progressive damage in fiber reinforced materials base on invariant failure criteria [Volume 5, Issue 2, 2018, Pages 191-199]
Absorption Percentage
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
ABS polymer. Mixed-mode fracture
Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
ABS/TPU
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Accumulative roll bonding
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Accumulative roll bonding (ARB)
A Study of layer strength in composite Al 1050/SS 316 manufactured by Accumulative Roll bonding process [Volume 5, Issue 4, 2018, Pages 479-484]
Acid aging
Experimental investigation of mode I delamination growth in unidirectional E-glass/vinyl ester composites on acid aging [Volume 7, Issue 1, 2020, Pages 731-739]
Acoustic emission
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Acoustic emission
Damages Evaluation of low velocity impact on Glass/Polyester-foam sandwich panels using the Acoustic Technique [Volume 6, Issue 2, 2019, Pages 319-329]
Acoustic emission
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Acoustic Non-destructive Evaluation
Acoustic scattering from helically wounded fiber reinforced composite cylindrical shells:
Resonance isolation, identification and classification
and bifurcation phenomenon [Volume 6, Issue 1, 2019, Pages 167-178]
Acrylonitrile Butadiene Rubber
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Acrylonitrile Butadiene Rubber
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
Acrylonitrile Butadiene Rubber
Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with Silicon carbide nanoparticles [Volume 8, Issue 4, 2021, Pages 1789-1796]
Active Control
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Additive manufacturing
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens [Volume 7, Issue 2, 2020, Pages 855-862]
Additive manufacturing
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]
Additive manufacturing
A correction factor to improve Poisson’s ratio prediction of 2D auxetic structure using finite element analysis and experiment [Volume 8, Issue 2, 2021, Pages 1556-1562]
Additive manufacturing
Experimental and numerical investigation of the energy absorption capability of the bi-material lattice structure [Volume 9, Issue 2, 2022, Pages 1976-1982]
Additive manufacturing
Comparison of flexural strength in rectangular shape 3D-printed PLA samples with different grooves [Volume 10, Issue 2, 2023, Pages 2210-2217]
Adhesion Strength
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Adhesive
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
Adhesive joint
Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive- riveted joints [Volume 2, Issue 2, 2015, Pages 71-78]
Adhesive joint
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2021, Pages 1699-1687]
Adhesive joint
Experimental investigation of the effect of different surface treatment on mode I fracture behavior of composite/aluminum adhesive joint [Volume 9, Issue 4, 2022, Pages 2116-2127]
Adhesive Joints
Experimental and Numerical Study of the Effect of Environmental Conditions on the Tensile Strength of Adhesive, Riveted and Hybrid Joints of E-Glass/Epoxy Composites [Volume 10, Issue 3, 2023, Pages 2273-2296]
Adhesive single lap joint
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints [Volume 7, Issue 2, 2020, Pages 941-948]
Agglomeration
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Aircraft wing
Static and dynamic analysis of composite thin walled beam with curvilinear fiber [Volume 6, Issue 1, 2019, Pages 79-88]
AISI 304L – Hastelloy X composite
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Al 3003 alloy
Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing [Volume 6, Issue 3, 2019, Pages 363-373]
Al3Zr and Al3Ti Aluminides
Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing [Volume 6, Issue 3, 2019, Pages 363-373]
Al5083
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2015, Pages 31-36]
Al 6061
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Al-7075-T6
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Al- Al2O3 Composite
Investigating the effect of the shot peening process on the properties and quality of Al-Al2O3 composite coating created by cold spraying [Volume 9, Issue 3, 2022, Pages 2006-2010]
Al-Al2O3 Composite
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Al+B2O3+Si+WO3 system
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Al-Brass
Study of interface of Al-brass composite fabricated by centrifugal casting [Volume 3, Issue 4, 2016, Pages 369-376]
Alginate
Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application [Volume 6, Issue 3, 2019, Pages 481-490]
Alkaline
Isocyanate modification of rice husk for using in polyurethane foam composite [Volume 9, Issue 4, 2022, Pages 2083-2088]
Al-Mg2Si in situ composite
Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites [Volume 6, Issue 2, 2019, Pages 242-247]
Al-Mg Composite
Melt-Solid-Gas behavior in the interface of Al/Mg composite produced by centrifugal casting [Volume 2, Issue 3, 2015, Pages 75-82]
Al-Mn-Al2O3-In-Situ composite
Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
Al-MnO2 system
Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
Al-SiC Composite
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Al-SiCp
Investigating the physical and surface properties at high temperature of the Al/SiC nanocomposite produced by powder metallurgy [Volume 2, Issue 1, 2015, Pages 33-40]
Alumina
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Alumina granule
Compression and impact strength study of aluminum-alumina granule composite by squeez-casting method [Volume 5, Issue 3, 2018, Pages 387-394]
Aluminium
Compression and impact strength study of aluminum-alumina granule composite by squeez-casting method [Volume 5, Issue 3, 2018, Pages 387-394]
Aluminium alloys
Study of tool flank wear and surface quality in milling of Al520-MMCs reinforced with SiC and Sn particles [Volume 9, Issue 2, 2022, Pages 1970-1975]
Aluminium alloys
Study Tool wear in Cryogenic milling of A356-10%SiC [Volume 10, Issue 3, 2023, Pages 2251-2256]
Aluminium oxide
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Aluminothermic combustion synthesize
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Aluminothermic reaction
Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
Aluminum
Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
Aluminum
Effect of preheating temperature on thickness and interfacial microstructure of Aluminum-Copper bimetallic composite produced by vertical centrifugal casting [Volume 4, Issue 4, 2017, Pages 391-398]
Aluminum
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Aluminum alloys
Study the effects of cutting speed and Cryogenic lubrication parameters on the surface roughness when milling A356-10%SiC [Volume 10, Issue 2, 2023, Pages 2242-2246]
Aluminum-brass composite
Defects characterization of Al-brass composite produced via centrifugal process [Volume 3, Issue 2, 2016, Pages 123-130]
Aluminum-brass composite
Effect of rotational speeds and heat content on the production of Al- Brass bimetal composite [Volume 4, Issue 2, 2017, Pages 219-228]
Aluminum-Copper Composite
Interface characterization of aluminum-copper bimetal composite produced via centrifugal casting [Volume 3, Issue 4, 2016, Pages 343-350]
Aluminum Foam
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Aluminum foam sandwich
Response of aluminum foam sandwiches under low rate impact [Volume 5, Issue 2, 2018, Pages 177-184]
Aluminum Foil
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Aluminum matrix composite
Study of strengthening mechanisms in an Al-Cu-Ti metallic glass reinforced Al matrix composite consolidated by ECAP process [Volume 4, Issue 2, 2017, Pages 171-178]
Aluminum matrix composites
Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles [Volume 2, Issue 2, 2015, Pages 55-62]
Amorphous-nanocrystalline coatings
The comparison in corrosion behavior of Fe-Ni-Cr composite coatings reinforced by SiC nanoparticles and carbon nanotubes [Volume 5, Issue 3, 2018, Pages 369-376]
Analytical and finite element methods
Multiscale modeling of fracture in polymer nanocomposite reinforced by intact and functionalized CNTs [Volume 4, Issue 1, 2017, Pages 35-46]
Analytical Model
Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
Anhydride hardener
Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
Annealing
Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing [Volume 6, Issue 3, 2019, Pages 363-373]
ANSYS software
Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
Anti-bacterial properties
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Artificial neural networks
Utilization of artificial neural networks for detection and classification of damages in composite plate-like structures via ultrasonic guided waves [Volume 5, Issue 3, 2018, Pages 343-352]
Aspect Ratio
Fabrication of Carbon Nanotubes-Based Efficient Electromagnetic Waves Shields Nanocomposites Using Electro-Mechanically Dispersion Technique [Volume 8, Issue 3, 2021, Pages 1744-1737]
As: Thermal expansion
Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles [Volume 2, Issue 2, 2015, Pages 55-62]
Attached mass
Investigation of attached mass effect on flutter speed of cantilever composite plate in supersonic flow [Volume 4, Issue 2, 2017, Pages 179-188]
Auxetic metamaterials
Free vibration analysis of rectangular doubly curved auxetic-core sandwich panels integrated with CNT-reinforced composite layers using Galerkin method [Volume 8, Issue 3, 2021, Pages 1686-1677]
Auxetic structures
A correction factor to improve Poisson’s ratio prediction of 2D auxetic structure using finite element analysis and experiment [Volume 8, Issue 2, 2021, Pages 1556-1562]
Axial compression test
Experimental and numerical analysis of composite lattice truncated conical structures with and without carbon nanotube reinforcements under axial compressive force [Volume 4, Issue 4, 2017, Pages 418-425]
Axially functionally graded material
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
Axially moving and rotational beam
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
B
Ballistic limit
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Ballistic limit
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Ballistic Limit Velocity
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
Ballistic Limit Velocity
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2018, Pages 511-520]
Ballistic Limit Velocity
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Balsa core
Comparison of moisture aging effect on flexural and buckling behavior of two types of balsa core sandwich structures [Volume 8, Issue 4, 2021, Pages 1767-1779]
Basalt
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Basalt
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Basalt fiber
Experimental investigation of creep behavior in Phenolic based polymer composites [Volume 1, Issue 2, 2014, Pages 37-42]
Basalt fibers
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
Basalt fibers
Effects of functionalized graphene nanoplatelets on the flexural behaviors of basalt fibers/epoxy composites [Volume 5, Issue 3, 2018, Pages 315-324]
Basalt fibers
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2019, Pages 495-502]
Basalt fibers
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2019, Pages 525-532]
Basalt fibers
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Basalt fibers
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2019, Pages 541-548]
Basalt fibers
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Basalt fibers
Investigating the mechanical behavior and microstructure of basalt fibers-aluminum composite fabricated by thixomixing method [Volume 10, Issue 1, 2023, Pages 2184-2192]
Basalt fibers
Investigating the effect of modified silica fume on the mechanical behavior of basalt fibers-epoxy composites under bending and tensile loading [Volume 10, Issue 2, 2023, Pages 2218-2224]
Batch foam
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
Beam
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
Bending
Tensile and flexural properties of epoxy-date palm fiber composites [Volume 5, Issue 1, 2018, Pages 69-78]
Bending
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Bending behavior
Numerical modeling of bending behavior of intra-ply hybrid composites using finite element method [Volume 2, Issue 4, 2015, Pages 59-66]
Bending behavior
Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
Bending behavior
Experimental Study of the mechanical behavior of self-healing polymer composite under heating cycles [Volume 6, Issue 2, 2019, Pages 183-189]
Bending behavior
Increasing the efficiency of carbon fiber bundles in reinforcing fine grained concrete: an experimental study of flexural bearing capacity [Volume 6, Issue 2, 2019, Pages 310-318]
Bending stiffness
Experimental and numerical investigation of effect of shape of ribs on flexural behavior of curved composite sandwich panels with lattice core under [Volume 6, Issue 3, 2019, Pages 351-362]
Biaxial preload
Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory [Volume 6, Issue 1, 2019, Pages 127-142]
Biharmonic equation
Exact micromechanical stress analysis of long fiber composites under uniform tensile loading [Volume 2, Issue 3, 2015, Pages 1-10]
Bilinear element
Geometrically nonlinear analysis of moderately thick curved composite panels under lateral load [Volume 2, Issue 1, 2015, Pages 53-64]
Bi-material Brazilian disc
Experimental mixed-mode fracture study in the interface of vertebrae bone tissue-hydroxyapatite cement using the bi-material Brazilian disc specimen [Volume 8, Issue 2, 2021, Pages 1583-1589]
Biomechanics
Numerical investigation of the material gradient using different stiffness functions by consideration of the graded stiffness of the dragonfly wing membrane [Volume 8, Issue 1, 2021, Pages 1307-1316]
Bipolar Plate
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Bond behavior
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2021, Pages 1642-1632]
Bone-cement
Experimental mixed-mode fracture study in the interface of vertebrae bone tissue-hydroxyapatite cement using the bi-material Brazilian disc specimen [Volume 8, Issue 2, 2021, Pages 1583-1589]
Boron nitride nanotube
Vibration analysis of boron nitride-reinforced nanocomposites embedded in elastic medium considering surface and electric field effects by using higher-order modified strain gradient theory [Volume 6, Issue 1, 2019, Pages 31-42]
Brake pad composite
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Brass/Graphite composite
Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
Bridging law
A novel approximate method for determining mixed mode I/II bridging law of laminated composites [Volume 8, Issue 4, 2021, Pages 1836-1848]
Bubble growth
Experimental Investigation on the Foaming Dynamics and Cell Microstructure of Polystyrene/Nanosilica/n-Pentane Nanocomposites [Volume 5, Issue 2, 2018, Pages 289-301]
Buckling
Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
Buckling
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2017, Pages 405-417]
Buckling
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Buckling
Buckling analysis of composite cross-ply laminated plates under hygrothermal loads with delaminations using the finite strip method [Volume 5, Issue 3, 2018, Pages 437-450]
Buckling
Experimental and Numerical Investigation of Effects of Stiffener in Buckling Resistance of square laminated composites with Circular Hole [Volume 6, Issue 1, 2019, Pages 43-52]
Buckling
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Buckling
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Buckling behavior
Comparison of moisture aging effect on flexural and buckling behavior of two types of balsa core sandwich structures [Volume 8, Issue 4, 2021, Pages 1767-1779]
Buckling strength
Numerical and Experimental Buckling Strength Analysis of Composite Grid Stiffened Cylindrical Shells Before and After Applying Low-Velocity Transverse Impact [Volume 8, Issue 1, 2021, Pages 1363-1372]
Bundle of carbon fibers efficiency
Increasing the efficiency of carbon fiber bundles in reinforcing fine grained concrete: an experimental study of flexural bearing capacity [Volume 6, Issue 2, 2019, Pages 310-318]
C
CaCO3 nanoparticle
Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
Cancer treatment
Fabrication and characterization of reduced graphene oxide-cobalt (rGO-Co) composite nanoparticlesfor use in hyperthermia [Volume 9, Issue 3, 2022, Pages 2023-2032]
Cantilever Composite plate
Investigation of attached mass effect on flutter speed of cantilever composite plate in supersonic flow [Volume 4, Issue 2, 2017, Pages 179-188]
Carbonaceous hybrid reinforcement
Effect of carbonaceous hybrid reinforcement and extrusion temperature on the microstructure and mechanical properties of AA7075 matrix hybrid composite prepared by semi-solid casting [Volume 8, Issue 1, 2021, Pages 1339-1352]
Carbon Epoxy
An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment [Volume 5, Issue 4, 2018, Pages 551-564]
Carbon fiber
An experimental investigation of the low velocity impact behavior of woven carbon-fiber-epoxy composites [Volume 6, Issue 4, 2019, Pages 571-580]
Carbon fiber laminated composite
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Carbon fiber reinforced composite
Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites [Volume 5, Issue 1, 2018, Pages 41-50]
Carbon-fiber-reinforced polymer (CFRP)
Numerical and experimental study of carbon / epoxy composite laminate response to low velocity impact [Volume 8, Issue 1, 2021, Pages 1461-1472]
Carbon fibers
Study of cyclic behavior, displacement-controlled low-cycle fatigue lifetime and failure in open-hole polymer-matrix composite reinforced by carbon fibers under various loading rates and amplitudes [Volume 8, Issue 1, 2021, Pages 1373-1386]
Carbon fibers thin-ply
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
Carbon nanofiber
Experimental investigation of charpy impact in energy absorption of hybrid and non-hybrid sandwich structures reinforced with carbon nanofiber [Volume 9, Issue 1, 2022, Pages 1920-1912]
Carbon nanofibers
Investigation of the effect of adding carbon nanofibers on the improvement of the mechanical properties of single-lap composite bolted joints [Volume 9, Issue 1, 2022, Pages 1884-1876]
Carbon Nanotube
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Carbon Nanotube
Three-dimensional residual stresses analysis of nanocomposite polymeric matrix based on fiber reinforced carbon nanotubes [Volume 2, Issue 4, 2015, Pages 23-30]
Carbon Nanotube
The investigation and comparison of mechanical propertise and microstructure Al/CNT and Al/CNT/Al2O3 copmosites produced by mixed accumulative roll bounding [Volume 4, Issue 4, 2017, Pages 464-470]
Carbon Nanotube
Micromechanical analysis of electro-elastic response of polymer composites reinforced with fuzzy fiber containing CNTs [Volume 5, Issue 4, 2018, Pages 485-498]
Carbon Nanotube
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Carbon Nanotube
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Carbon Nanotube
A developed micromechanical model to predict electrical properties of polymer nanocomposites containing carbon nanotubes [Volume 9, Issue 2, 2022, Pages 1961-1969]
Carbon Nanotube
Manufacturing and evaluation of mechanical and physical properties of green geopolymer composite reinforced with kenaf fibers and carbon nanotubes [Volume 9, Issue 3, 2022, Pages 2011-2022]
Carbon nanotube/Cadmium Oxide
Production of uniform nanocomposite coating of polypyrrole carbon nanotube/ cadmium oxide to protect corrosion of austenitic stainless steel 304 [Volume 5, Issue 3, 2018, Pages 377-386]
Carbon nanotubes
Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
Carbon nanotubes
Synthesis and characterization of cement- CNT composite produced by CVD process [Volume 4, Issue 3, 2017, Pages 295-302]
Carbon nanotubes
Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes [Volume 8, Issue 1, 2021, Pages 1453-1460]
Carbon nanotubes
Extraction of Mechanical Properties of Carbon Nanotubes in water Based Polymer latex for Application in Petroleum Well Cementing [Volume 8, Issue 4, 2021, Pages 1758-1766]
Carbon Nano tubes
An experimental study of the effects of carbon nanotube and graphene addition on the impact strength of Epoxy/Basalt fiber composite [Volume 6, Issue 3, 2019, Pages 411-418]
CARB process
Evaluation of mechanical properties and microstructure for Al/Ni %5 produced by cross accumulative roll bonding process [Volume 5, Issue 2, 2018, Pages 279-288]
Casting nanocomposite
Investigation of the microstructure and hardness of cast Al7068 nanocomposite reinforced with SiC nanoparticles [Volume 5, Issue 4, 2018, Pages 461-468]
Casting nanocomposite
Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with mechanical and electromagnetic stirring [Volume 8, Issue 2, 2021, Pages 1532-1542]
Cast Iron
Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
Cell density
Experimental Investigation on the Foaming Dynamics and Cell Microstructure of Polystyrene/Nanosilica/n-Pentane Nanocomposites [Volume 5, Issue 2, 2018, Pages 289-301]
Cell wall thickness
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
Cement
Synthesis and characterization of cement- CNT composite produced by CVD process [Volume 4, Issue 3, 2017, Pages 295-302]
Cement compounds Concrete strength
Extraction of Mechanical Properties of Carbon Nanotubes in water Based Polymer latex for Application in Petroleum Well Cementing [Volume 8, Issue 4, 2021, Pages 1758-1766]
Centrifugal casting in-situ method
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2021, Pages 1749-1757]
Ceramic matrix composite
Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
CFRP
Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite [Volume 2, Issue 4, 2015, Pages 51-58]
Charpy
An experimental study of the effects of carbon nanotube and graphene addition on the impact strength of Epoxy/Basalt fiber composite [Volume 6, Issue 3, 2019, Pages 411-418]
Charpy impact
Experimental Investigation of Dynamic Behavior of Composite Sandwich Panel Using Self-healing Materials under CHARPY impact and 3-point Bending Destruction [Volume 4, Issue 4, 2017, Pages 434-442]
Charpy impact
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Charpy Impact Test
Experimental investigation of charpy impact in energy absorption of hybrid and non-hybrid sandwich structures reinforced with carbon nanofiber [Volume 9, Issue 1, 2022, Pages 1920-1912]
Chemical reaction
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Chemical vapor deposition
Synthesis and characterization of cement- CNT composite produced by CVD process [Volume 4, Issue 3, 2017, Pages 295-302]
Chitosan
Preparation and optimization of Chitosan-Montmorillonite nanocomposite formulations containing Curcumin [Volume 7, Issue 1, 2020, Pages 714-722]
Chopped microglass tubes
Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers [Volume 4, Issue 4, 2017, Pages 399-404]
Chromium Carbides
Feasibility of Production of an iron-base Metal Matrix Composite by Infiltration of molten Gray Cast Iron into a 304 Stainless Steel Porous Skeleton [Volume 8, Issue 3, 2021, Pages 1658-1653]
Circular plate
Hydroelastic vibration analysis of functionally graded circular plate in contact with bounded fluid by Ritz method [Volume 5, Issue 4, 2018, Pages 529-538]
Classic Theory
Analytical solution for stresses in the spherical shell of a thin-wall composite multi-layer vessel under internal pressure by using the classical theory of shells [Volume 10, Issue 3, 2023, Pages 2297-2311]
Cleanshaw Curtis
Uncertainty quantification of natural frequencies of flax/epoxy composite laminates based on a polynomial chaos expansion method [Volume 8, Issue 1, 2021, Pages 1327-1338]
CLT
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2020, Pages 1271-1278]
CNT
Analytical solution for free vibration of functionally graded carbon nanotubes (FG-CNT) reinforced double-layered nano-plates resting on elastic medium [Volume 2, Issue 3, 2015, Pages 55-66]
Coated structures
Nondestructive evaluation of bilayer metal-composite structures using finite element simulation of guided Lamb wave propagation [Volume 8, Issue 3, 2021, Pages 1707-1700]
Coated structures
Nondestructive evaluation of corrosion in pipes with composite coating with the finite element simulation of guided wave propagation [Volume 10, Issue 3, 2023, Pages 2312-2319]
Coating
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
Coating
Investigating the effects of shot peening and Polycaprolactone (PCL) electrospinning surface treatments on the corrosion properties of Mg-2.5٪HA biocomposite [Volume 10, Issue 3, 2023, Pages 2266-2272]
Coating surface
Study of microstructure and tribological behavior of the composite layer produced of silicon carbide particles on a steel ASTM A106 GTAW welding method [Volume 2, Issue 1, 2015, Pages 65-72]
Cobalt oxide
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Cobalt -Vanadium boride
Production and characterization of Cobalt/Vanadium Boride composite powder by mechanochemical method and acid leaching [Volume 4, Issue 1, 2017, Pages 75-82]
Co-cured method
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]
Coercivity
Preparation of Fe-Mn nanowire alloys and the study of the effect of manganese content, annealing and electrodeposition frequency on their magnetic properties [Volume 4, Issue 3, 2017, Pages 255-262]
Cohesive joint
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
Cohesive zone
Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
Cohesive zone
Fatigue analysis of composite sandwich panel by continuum damage mechanics method with interlayer element [Volume 9, Issue 2, 2022, Pages 1952-1960]
Cohesive Zone Length
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2020, Pages 1235-1242]
Cohesive zone model
Failure analysis of composite wing adhesive joints using 3D cohesive interface element [Volume 2, Issue 2, 2015, Pages 31-40]
Cohesive zone model
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Cohesive zone model
Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive- riveted joints [Volume 2, Issue 2, 2015, Pages 71-78]
Cohesive zone model
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2020, Pages 1235-1242]
Cohesive zone model (CZM)
Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using inverse method [Volume 4, Issue 1, 2017, Pages 83-90]
Cohesive Zone Modeling
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Cold and Hot Forming
An Investigation into the Comparison between Hot and Cold Forming of Copper-Aluminum Composite Tubes by utilizing Hydroforming and Gasforming Processes [Volume 4, Issue 2, 2017, Pages 205-218]
Cold Roll Bonding
Investigation of mechanical properties, fracturgeraphi and microstructure of layered Al/Cu composite produced by cold roll bonding [Volume 4, Issue 3, 2017, Pages 311-318]
Cold Roll Bonding
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Cold spray
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Cold spray
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Cold spray
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Cold spray
Investigating the effect of the shot peening process on the properties and quality of Al-Al2O3 composite coating created by cold spraying [Volume 9, Issue 3, 2022, Pages 2006-2010]
Combustion synthesis
Fabrication and phases study in Al/(Al2O3+AlxVy+AlaNib) in situ composite [Volume 4, Issue 3, 2017, Pages 303-310]
Comosite tube
Numerical Investigation of the Parameters Affecting on the Composite Tubes Response under Axial Impact [Volume 6, Issue 2, 2019, Pages 200-212]
Complex Variable Method
Presenting an explicit relation for analyzing stress of plates with quasi-square holes and under tension by using multiple linear regression [Volume 6, Issue 1, 2019, Pages 21-30]
Composite
Study of microstructure and tribological behavior of the composite layer produced of silicon carbide particles on a steel ASTM A106 GTAW welding method [Volume 2, Issue 1, 2015, Pages 65-72]
Composite
Numerical modeling of bending behavior of intra-ply hybrid composites using finite element method [Volume 2, Issue 4, 2015, Pages 59-66]
Composite
Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
Composite
Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
Composite
Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
Composite
Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
Composite
Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
Composite
Study of interface of Al-brass composite fabricated by centrifugal casting [Volume 3, Issue 4, 2016, Pages 369-376]
Composite
Production and characterization of Cobalt/Vanadium Boride composite powder by mechanochemical method and acid leaching [Volume 4, Issue 1, 2017, Pages 75-82]
Composite
Assessment of mixed adhesive in single lap and peel joint with composite substrate [Volume 4, Issue 2, 2017, Pages 189-194]
Composite
Synthesis and characterization of cement- CNT composite produced by CVD process [Volume 4, Issue 3, 2017, Pages 295-302]
Composite
Effect of different triggering on crashworthiness of composite crash box [Volume 4, Issue 3, 2017, Pages 327-336]
Composite
Experimental Investigation of Dynamic Behavior of Composite Sandwich Panel Using Self-healing Materials under CHARPY impact and 3-point Bending Destruction [Volume 4, Issue 4, 2017, Pages 434-442]
Composite
Investigation of skin/core debonding effects on the natural frequencies of composite sandwich structures using experimental and numerical modal analysis [Volume 5, Issue 1, 2018, Pages 91-98]
Composite
A semi-empirical model to predict the low-velocity impact behavior of weft-knitted spacer fabrics reinforced composites [Volume 5, Issue 1, 2018, Pages 117-126]
Composite
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Composite
Compression and impact strength study of aluminum-alumina granule composite by squeez-casting method [Volume 5, Issue 3, 2018, Pages 387-394]
Composite
Effect of Nitinol Addition on the Mechanical properties and the Microstructure of Nactural Hydroxyapatite Obtained from Calf Femoral Bone [Volume 5, Issue 2, 2018, Pages 238-244]
Composite
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Composite
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Composite
Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application [Volume 6, Issue 3, 2019, Pages 481-490]
Composite
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Composite
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2020, Pages 1197-1206]
Composite
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Composite
Experimental study on mechanical and physical properties of biodegradable fiber reinforced composites [Volume 8, Issue 2, 2021, Pages 1563-1572]
Composite
Manufacturing and evaluation of mechanical and physical properties of green geopolymer composite reinforced with kenaf fibers and carbon nanotubes [Volume 9, Issue 3, 2022, Pages 2011-2022]
Composite
Feasibility of using lead-acid battery separators as additives in polyethylene composites [Volume 9, Issue 4, 2022, Pages 2075-2082]
Composite
Experimental investigation of the effect of different surface treatment on mode I fracture behavior of composite/aluminum adhesive joint [Volume 9, Issue 4, 2022, Pages 2116-2127]
Composite
Monte Carlo simulation and determination of gamma ray protection characteristics of composites containing Bismuth Oxide and elements of Gadolinium, Titanium, Tungsten, Zirconium, Zinc and Yttrium [(Articles in Press)]
Composite Al/St
A Study of layer strength in composite Al 1050/SS 316 manufactured by Accumulative Roll bonding process [Volume 5, Issue 4, 2018, Pages 479-484]
Composite beam
Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
Composite beam
Evaluation of variation in the mechanical properties of composite laminates using progressive failure analysis [Volume 5, Issue 1, 2018, Pages 51-60]
Composite beam
Energy Harvesting from Laminated Composite Beam with a Piezoelectric Layer under Forced Vibrations [Volume 5, Issue 2, 2018, Pages 227-237]
Composite beam
Development of the Virtual Crack Closure Technique using Layer Wise theory for Delamination Propagation of a Composite Beam in Mode I [Volume 8, Issue 1, 2021, Pages 1443-1452]
Composite coatings
The comparison in corrosion behavior of Fe-Ni-Cr composite coatings reinforced by SiC nanoparticles and carbon nanotubes [Volume 5, Issue 3, 2018, Pages 369-376]
Composite cylinder
The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
Composite cylinder
Experimental and numerical investigation of buckling and post-buckling behavior of filament wound composite cylinders under lateral compression loading by parallel rigid plates [Volume 6, Issue 1, 2019, Pages 151-166]
Composite cylindrical shell
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Composite cylindrical shells
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Composite cylindrical shells
Parametric impact analysis on cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 9, Issue 4, 2022, Pages 2099-2115]
Composite grid stiffened cylindrical shells
Experimental and Numerical Study of Residual Strength of Composite Grid Stiffened Cylindrical Shells Under Sequential Compressive Axial Load [Volume 8, Issue 2, 2021, Pages 1503-1513]
Composite grid structure
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Composite laminate
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
Composite laminate
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Composite laminates
Modeling damage evolution of composite laminates under low velocity off-center impact [Volume 3, Issue 3, 2016, Pages 243-252]
Composite lattice core
Experimental and numerical methods for free vibration analysis of sandwich conical shells with anisogrid composite lattice core [(Articles in Press)]
Composite materials
The effect of middle layer material and thickness on the quasi-static energy absorption of FML [Volume 5, Issue 3, 2018, Pages 427-436]
Composite patch
Mixed mode fatigue crack growth analysis of cracked aluminium panel repaired with composite patches using extended finite element method [Volume 3, Issue 4, 2016, Pages 321-332]
Composite patch
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
Composite patches
Experimental and Numerical Simulation of Thermography for Detection of Disbond in Repaired Aluminum by Composite Patch [Volume 6, Issue 4, 2019, Pages 591-600]
Composite plate
Increasing robustness of solution versus noise for identifying delamination damage in composite plates using a hybrid method [Volume 4, Issue 2, 2017, Pages 125-134]
Composite plate
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2017, Pages 405-417]
Composite plate
Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires [Volume 4, Issue 4, 2017, Pages 363-374]
Composite plate
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Composite plate reinforced by carbon nanotube
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Composite plates
Finite element simulation of high velocity impact on polymer composite plates [Volume 5, Issue 2, 2018, Pages 157-168]
Composite plates
Ultimate strength analysis of imperfect composite plates under both in-plane compressive load and lateral pressure using Ritz method [Volume 5, Issue 1, 2018, Pages 1-10]
Composite plates
Utilization of artificial neural networks for detection and classification of damages in composite plate-like structures via ultrasonic guided waves [Volume 5, Issue 3, 2018, Pages 343-352]
Composite plates
Buckling analysis of composite cross-ply laminated plates under hygrothermal loads with delaminations using the finite strip method [Volume 5, Issue 3, 2018, Pages 437-450]
Composite sandwich panel
Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
Composite sandwich plate
Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory [Volume 6, Issue 1, 2019, Pages 127-142]
Composite Sandwich Sheet
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Composites based on bismuth
Monte Carlo simulation and determination of gamma ray protection characteristics of composites containing Bismuth Oxide and elements of Gadolinium, Titanium, Tungsten, Zirconium, Zinc and Yttrium [(Articles in Press)]
Composite Shell
Using a Multi Domain Generalized Differential Quadrature Method to Study the Effect of Crack on the Vibrational Behavior of Composite Cylindrical Shell [Volume 8, Issue 4, 2021, Pages 1749-1760]
Composites made with tubular braiding
Prediction and control of the mechanical properties of braided composite by controlling the braid angle using the micro-mechanical relationships for each of the flat faces of mandrel [Volume 5, Issue 4, 2018, Pages 595-604]
Composite structure
The effect of graphene nanoparticles on the strength of sandwich panel structure under quasi-static loading and low-velocity impact [Volume 9, Issue 3, 2022, Pages 1994-2005]
Composite structures
Reliability analysis based on polynomial chaos expansion method in composite structures [Volume 6, Issue 4, 2019, Pages 627-636]
Composite T-joints
Numerical and experimental analysis of dynamical behavior of composite T-joint with step wise graded adhesive zone based on functional behavior model [Volume 4, Issue 3, 2017, Pages 319-326]
Composite tube
Stress analysis of single-lap bonded joints in composite tubes
under torsion and hygrothermal effects using DQM [Volume 4, Issue 4, 2017, Pages 375-385]
Composite tube
Experimental and Finite Element Investigation of Hot Gas Forming Process of A6063-AZ80 Bi-layered Composite Tubes using Taguchi Methods for Design of Experiments [Volume 5, Issue 1, 2018, Pages 79-90]
Composite tubes
Experimental Investigation of the Effect of Different Parameters on the Behavior of Glass / Epoxy Composite Tubes under quasi-Static axial Loading [Volume 5, Issue 4, 2018, Pages 499-510]
Compression Hopkinson test
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
Compressive properties
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2021, Pages 1817-1825]
Compressive strength
Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites [Volume 6, Issue 2, 2019, Pages 242-247]
Compressive yield stress
Experimental study of the compression behavior of Graphene Oxide and Nano-clay reinforced polycarbonate nanocomposites at low strain rates [Volume 6, Issue 3, 2019, Pages 427-434]
Computed tomography
Response of aluminum foam sandwiches under low rate impact [Volume 5, Issue 2, 2018, Pages 177-184]
Concrete
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2020, Pages 1255-1262]
Conductive polymer
Preparation and properties investigation of conductive Polyaniline-Zinc Oxide nanocomposites [Volume 2, Issue 1, 2015, Pages 7-12]
Conductive polymer nanocomposite
A developed micromechanical model to predict electrical properties of polymer nanocomposites containing carbon nanotubes [Volume 9, Issue 2, 2022, Pages 1961-1969]
Conductivity
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Confocal Laser Scanning Microscopy
Numerical investigation of the material gradient using different stiffness functions by consideration of the graded stiffness of the dragonfly wing membrane [Volume 8, Issue 1, 2021, Pages 1307-1316]
Conical sandwich shell
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Connection between core and layers
Experimental study of bond strength between core and composite layers under tensile and shear loads in different methods of fabricating nucleate composite structures [Volume 8, Issue 3, 2021, Pages 1667-1659]
Constant curvature path
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2017, Pages 405-417]
Constitutive model
Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
Constrained optimization
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate): part Ⅱ, Constrained Optimization [Volume 6, Issue 1, 2019, Pages 119-126]
Contact
Sliding contact between a rigid cylindrical punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 2, Issue 3, 2015, Pages 11-22]
Contact force history
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Contact non-linear equation
Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact [Volume 5, Issue 3, 2018, Pages 331-342]
Continuous fiber glass composite
Investigating the strength of the ultrasonic welding of the polyamide 6 continuous fiber glass composite [Volume 10, Issue 1, 2023, Pages 2176-2183]
Continuum
Damage analysis of holed composite laminates using continuum damage mechanics [Volume 2, Issue 3, 2015, Pages 22-34]
Continuum damage mechanic
Fatigue analysis of composite sandwich panel by continuum damage mechanics method with interlayer element [Volume 9, Issue 2, 2022, Pages 1952-1960]
Continuum damage mechanics
Fatigue life prediction of symmetric cross ply laminated composite using a developed continuum damage mechanics based model [Volume 2, Issue 1, 2015, Pages 13-22]
Continuum damage mechanics
Failure analysis of composite wing adhesive joints using 3D cohesive interface element [Volume 2, Issue 2, 2015, Pages 31-40]
Continuum damage mechanics
Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
Core stiffness
Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory [Volume 6, Issue 1, 2019, Pages 127-142]
Cork
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Corrosion
Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
Corrosion
The comparison in corrosion behavior of Fe-Ni-Cr composite coatings reinforced by SiC nanoparticles and carbon nanotubes [Volume 5, Issue 3, 2018, Pages 369-376]
Corrosion
Experimental investigation of mechanical properties, corrosion and biocompatibility of Ti/RGO composite made by the combined method of spark plasma sintering and simple shear extrusion [Volume 9, Issue 1, 2022, Pages 1926-1921]
Corrosion
A review on anti-corrosion self-healing epoxy coatings [Volume 9, Issue 3, 2022, Pages 2046-2062]
Corrosion
Investigation of Tribological Properties of Nano-Composite Copper / Titanium Dioxide Alloy Produced Using Friction-Stir Process [Volume 9, Issue 4, 2022, Pages 2067-2074]
Corrosion mechanisms
Analysis of tensile failure mode and the mechanism dominated over polymer composite degradation [Volume 6, Issue 4, 2019, Pages 601-608]
Corrosion Protection
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
Corrugated core
The effect of Shape memory wire on the ballistic behavior of smart corrugated core sandwich panels [Volume 8, Issue 2, 2021, Pages 1612-1627]
Cotton fabric
Experimental study on mechanical and physical properties of biodegradable fiber reinforced composites [Volume 8, Issue 2, 2021, Pages 1563-1572]
Cotton fiber
Tensile properties of flexible latex-based composites reinforced by cotton fibers in the presence of shape memory alloys [Volume 8, Issue 4, 2021, Pages 1780-1788]
Coupled vibrations
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
Crack density
Evaluation of matrix cracking in cross-ply composites using the finite element simulation of guided Lamb wave propagation [Volume 10, Issue 3, 2023, Pages 2257-2265]
Crash box
Effect of different triggering on crashworthiness of composite crash box [Volume 4, Issue 3, 2017, Pages 327-336]
CRB
Evaluation of the elastic and plastic properties of Al/Brass/Al composite fabricated by roll bonding process via digital image correlation method [Volume 6, Issue 4, 2019, Pages 581-590]
Creep
Experimental investigation of creep behavior in Phenolic based polymer composites [Volume 1, Issue 2, 2014, Pages 37-42]
Creep
Creep Analysis of FGM Rotating Disc with non-Uniform Profiles [Volume 1, Issue 2, 2014, Pages 29-36]
Creep
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
Creep
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Creep
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2020, Pages 1227-1234]
Creep modeling
Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
Critical strain energy
Evaluation the energy release rate of induced delamination due to matrix cracking in symmetric composite laminate [Volume 6, Issue 1, 2019, Pages 53-68]
Cross ply composite
Evaluation of matrix cracking in cross-ply composites using the finite element simulation of guided Lamb wave propagation [Volume 10, Issue 3, 2023, Pages 2257-2265]
Cross-ply Laminated Composites
Prediction of damage propagation in cross-ply laminated composites subjected to uniaxial tensile loading [Volume 9, Issue 1, 2022, Pages 1911-1893]
Cross-ply layer stacking
Analysis of interlaminar stresses in cross-ply composite cylinders subjected to radial loads [Volume 2, Issue 3, 2015, Pages 43-54]
Cryogenic cooling
Study the effects of cutting speed and Cryogenic lubrication parameters on the surface roughness when milling A356-10%SiC [Volume 10, Issue 2, 2023, Pages 2242-2246]
Cryogenic cycling
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2019, Pages 541-548]
CTBN
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
Curing kinetic
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
Curing temperature
The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
Curvature
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Curved composite sandwich panel
Experimental and numerical investigation of effect of shape of ribs on flexural behavior of curved composite sandwich panels with lattice core under [Volume 6, Issue 3, 2019, Pages 351-362]
Curvilinear fiber
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2017, Pages 405-417]
Curvilinear fiber
Static and dynamic analysis of composite thin walled beam with curvilinear fiber [Volume 6, Issue 1, 2019, Pages 79-88]
Cutout in the wall of cylindrical shells
Analysis of free vibration of laminated composite cylindrical shells with rectangular cutout [Volume 10, Issue 2, 2023, Pages 2196-2209]
Cylindrical lattice
Experimental and numerical investigation on semi-cylindrical compositelatticereinforced with triangular cellssubjected to high velocity impact [Volume 5, Issue 2, 2018, Pages 208-217]
Cylindrical Shells
An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment [Volume 5, Issue 4, 2018, Pages 551-564]
D
Damage
Experimental and numerical investigation on semi-cylindrical compositelatticereinforced with triangular cellssubjected to high velocity impact [Volume 5, Issue 2, 2018, Pages 208-217]
Damage
Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels [Volume 5, Issue 2, 2018, Pages 271-278]
Damage mechanics
Damage analysis of holed composite laminates using continuum damage mechanics [Volume 2, Issue 3, 2015, Pages 22-34]
Damping
Effect of damping on nonlinear forced vibration response of graphene-based nanocomposites [Volume 4, Issue 2, 2017, Pages 141-150]
Date palm fibers
Tensile and flexural properties of epoxy-date palm fiber composites [Volume 5, Issue 1, 2018, Pages 69-78]
Defects detection
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Deflection
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Degree of Cure
Modeling of Degree of Cure in Epoxy-glass Prepreg [Volume 1, Issue 2, 2014, Pages 43-48]
Delamination
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Delamination
Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite [Volume 2, Issue 4, 2015, Pages 51-58]
Delamination
Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
Delamination
Study of the effect of machining parameters on delamination in rotary ultrasonic machining process of glass fiber reinforced polymer composite by diamond core tool [Volume 4, Issue 1, 2017, Pages 67-74]
Delamination
Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using inverse method [Volume 4, Issue 1, 2017, Pages 83-90]
Delamination
Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites [Volume 5, Issue 1, 2018, Pages 41-50]
Delamination
Buckling analysis of composite cross-ply laminated plates under hygrothermal loads with delaminations using the finite strip method [Volume 5, Issue 3, 2018, Pages 437-450]
Delamination
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
Delamination
Improvement of delamination resistance of glass-phenolic composites through matrix toughening mechanism using poly (vinyl butyral) [Volume 5, Issue 4, 2018, Pages 521-528]
Delamination
Evaluation the energy release rate of induced delamination due to matrix cracking in symmetric composite laminate [Volume 6, Issue 1, 2019, Pages 53-68]
Delamination
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Delamination
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Delamination
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Delamination
Reliability analysis of the delamination onset and growth due to the matrix cracking in general composite laminates [Volume 8, Issue 1, 2021, Pages 1397-1410]
Delamination
Development of the Virtual Crack Closure Technique using Layer Wise theory for Delamination Propagation of a Composite Beam in Mode I [Volume 8, Issue 1, 2021, Pages 1443-1452]
Delamination
Investigation of thermal fatigue effects on crack propagation and mode I delamination of multilayer laminated composites using digital image correlation [Volume 8, Issue 3, 2021, Pages 1652-1643]
Delamination
A novel approximate method for determining mixed mode I/II bridging law of laminated composites [Volume 8, Issue 4, 2021, Pages 1836-1848]
Delamination
Modeling and analysis of mechanical behavior of drilled laminated composites subjected to tensile and compressive loads [Volume 9, Issue 3, 2022, Pages 2033-2045]
Delamination in Composites
Comparison of numerical and analytical cohesive zone length models in the delamination of composite laminates [Volume 7, Issue 4, 2020, Pages 1235-1242]
Dental caries
A review of recent studies on self-healing smart composites for application in dentistry [Volume 6, Issue 3, 2019, Pages 435-450]
Dental composite
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Dental composite
A review of recent studies on self-healing smart composites for application in dentistry [Volume 6, Issue 3, 2019, Pages 435-450]
Dental Composites
Life cycle estimation of notched polymer base dental composites reinforced with nanoparticles [Volume 9, Issue 2, 2022, Pages 1983-1989]
Design of experiments
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Determination of residual stresses
Simulated nano-indentation method for estimation of micro-residual stresses of a unidirectional composite ply [Volume 2, Issue 4, 2015, Pages 1-12]
Developing Homotopy Perturbation Method
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Diamond core tool
Study of the effect of machining parameters on delamination in rotary ultrasonic machining process of glass fiber reinforced polymer composite by diamond core tool [Volume 4, Issue 1, 2017, Pages 67-74]
Dibenzothiphene removal
Preparation of magnetic polyaniline nanocomposite and study its application for the removal of dibenzothiophene [Volume 6, Issue 2, 2019, Pages 294-299]
DIC method
Evaluation of the elastic and plastic properties of Al/Brass/Al composite fabricated by roll bonding process via digital image correlation method [Volume 6, Issue 4, 2019, Pages 581-590]
Different environmental temperatures
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
Differential Quadrature Method (DQM)
Stress analysis of single-lap bonded joints in composite tubes
under torsion and hygrothermal effects using DQM [Volume 4, Issue 4, 2017, Pages 375-385]
Different temperature condition
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Dimensional analysis
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Disbond
Experimental and Numerical Simulation of Thermography for Detection of Disbond in Repaired Aluminum by Composite Patch [Volume 6, Issue 4, 2019, Pages 591-600]
Disc profile
Creep Analysis of FGM Rotating Disc with non-Uniform Profiles [Volume 1, Issue 2, 2014, Pages 29-36]
Dispersion curve
Inspection of Multilayer Pipes Using Torsional Guided Waves [Volume 8, Issue 2, 2021, Pages 1603-1611]
Displacement amplitude
Study of cyclic behavior, displacement-controlled low-cycle fatigue lifetime and failure in open-hole polymer-matrix composite reinforced by carbon fibers under various loading rates and amplitudes [Volume 8, Issue 1, 2021, Pages 1373-1386]
Displacement rate
Study of cyclic behavior, displacement-controlled low-cycle fatigue lifetime and failure in open-hole polymer-matrix composite reinforced by carbon fibers under various loading rates and amplitudes [Volume 8, Issue 1, 2021, Pages 1373-1386]
Divergence and flutter
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
DMA
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2020, Pages 1227-1234]
Double Curved Sandwich Panel
Free Vibration and Static Bending Analysis of Curved Sandwich Panel with Magneto-Rheological Fluid Layer in Sheets using Improved High Order Sandwich Panel Theory [Volume 1, Issue 2, 2014, Pages 49-62]
Doubly curved panels
Free vibration analysis of rectangular doubly curved auxetic-core sandwich panels integrated with CNT-reinforced composite layers using Galerkin method [Volume 8, Issue 3, 2021, Pages 1686-1677]
Drilling
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Drilling
Modeling and analysis of mechanical behavior of drilled laminated composites subjected to tensile and compressive loads [Volume 9, Issue 3, 2022, Pages 2033-2045]
Drop impact test
Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
Drop impact test
Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
Drop-weight impact
Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels [Volume 5, Issue 2, 2018, Pages 271-278]
Drop wieght & low velocity impact
Numerical Investigation of the Parameters Affecting on the Composite Tubes Response under Axial Impact [Volume 6, Issue 2, 2019, Pages 200-212]
Drucker-Prager Criterion
Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
Ductility
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Dynamic Behavior
Numerical and experimental analysis of dynamical behavior of composite T-joint with step wise graded adhesive zone based on functional behavior model [Volume 4, Issue 3, 2017, Pages 319-326]
Dynamic behavior of composite
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
Dynamic Loading
A numerical analysis on effect of impedance and thickness of various layers on deflection of target plate in layered armor systems under explosive loading [Volume 1, Issue 2, 2014, Pages 11-20]
Dynamic Loading
Non-linear response of Fiber Metal Laminates subjected to temperature and dynamic loadings [Volume 7, Issue 1, 2020, Pages 768-778]
Dynamic response
Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
Dynamic response
Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory [Volume 6, Issue 1, 2019, Pages 127-142]
Dynamic response
Dynamic response of FG rectangular plate in contact with stationary fluid under moving load [Volume 6, Issue 2, 2019, Pages 213-224]
E
Eccentricity
Prediction and control of the mechanical properties of braided composite by controlling the braid angle using the micro-mechanical relationships for each of the flat faces of mandrel [Volume 5, Issue 4, 2018, Pages 595-604]
Edge trigger
Effect of different triggering on crashworthiness of composite crash box [Volume 4, Issue 3, 2017, Pages 327-336]
Effect of core cross-sectional shape
Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels [Volume 5, Issue 2, 2018, Pages 271-278]
EIS
The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
Elastic foundation
Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
Elastic foundation
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Elasticity
Exact micromechanical stress analysis of long fiber composites under uniform tensile loading [Volume 2, Issue 3, 2015, Pages 1-10]
Elastomeric Auxetic Structures
Investigation on the Energy Absorption of Elastomeric Auxetic Structures in Quasi-static and Impact Loading [Volume 8, Issue 1, 2021, Pages 1431-1442]
Elasto-plasto-damage
Experimental and numerical investigation of the energy absorption capability of the bi-material lattice structure [Volume 9, Issue 2, 2022, Pages 1976-1982]
Electrical conductivity
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Electric field
Vibration analysis of boron nitride-reinforced nanocomposites embedded in elastic medium considering surface and electric field effects by using higher-order modified strain gradient theory [Volume 6, Issue 1, 2019, Pages 31-42]
Electrodeposition
Preparation of Fe-Mn nanowire alloys and the study of the effect of manganese content, annealing and electrodeposition frequency on their magnetic properties [Volume 4, Issue 3, 2017, Pages 255-262]
Electrodeposition
The comparison in corrosion behavior of Fe-Ni-Cr composite coatings reinforced by SiC nanoparticles and carbon nanotubes [Volume 5, Issue 3, 2018, Pages 369-376]
Electro-elastic
Micromechanical analysis of electro-elastic response of polymer composites reinforced with fuzzy fiber containing CNTs [Volume 5, Issue 4, 2018, Pages 485-498]
Electromagnetic
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Electromechanical
Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
Electromechanical coupling
Energy Harvesting from Laminated Composite Beam with a Piezoelectric Layer under Forced Vibrations [Volume 5, Issue 2, 2018, Pages 227-237]
Electrospinning
A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers [Volume 5, Issue 3, 2018, Pages 325-330]
Electrospinning
Investigating the effects of shot peening and Polycaprolactone (PCL) electrospinning surface treatments on the corrosion properties of Mg-2.5٪HA biocomposite [Volume 10, Issue 3, 2023, Pages 2266-2272]
Electrostatic
The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
Elongation at break
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Emulsion PVC Synthetic leather
Investigation of curing time and temperature effects on mechanical properties and thermal degradation of artificial leather made of PVC [Volume 10, Issue 1, 2023, Pages 2132-2137]
Energy absorber
Effect of different triggering on crashworthiness of composite crash box [Volume 4, Issue 3, 2017, Pages 327-336]
Energy Equation
Modeling of Degree of Cure in Epoxy-glass Prepreg [Volume 1, Issue 2, 2014, Pages 43-48]
Energy level
Three dimensional weft knitted sandwich composites under drop-weight impacts in different energy levels [Volume 5, Issue 2, 2018, Pages 271-278]
Energy release rate
Matrix Cracking and Induced Delamination in Symmetrically Laminated Composites Subjected to Static Loading by using Multi Scale Damage Mechanics [Volume 4, Issue 1, 2017, Pages 9-24]
Energy release rate
Evaluation the energy release rate of induced delamination due to matrix cracking in symmetric composite laminate [Volume 6, Issue 1, 2019, Pages 53-68]
Environmental Degradation
Deleterious Effects of Seawater, acidic water and Alkali water on Mechanical Properties of Nanocomposite adhesives [Volume 9, Issue 1, 2022, Pages 1936-1927]
EPDM
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
EPDM
Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes [Volume 8, Issue 1, 2021, Pages 1453-1460]
Epoxy-carbon fibers composite
Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
Epoxy-glass fiber composite
Experimental Study of the mechanical behavior of self-healing polymer composite under heating cycles [Volume 6, Issue 2, 2019, Pages 183-189]
Epoxy/Glass prepreg
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
Epoxy Matrix
An experimental investigation of the low velocity impact behavior of woven carbon-fiber-epoxy composites [Volume 6, Issue 4, 2019, Pages 571-580]
Epoxy polymer concrete
The use of Taguchi method for mix-design optimization of polymer concrete with high resistance against mode I crack growth [Volume 9, Issue 1, 2022, Pages 1892-1885]
Epoxy resin
Study of the influence of temperature and nanosilica on curing behavior and cure kinetics modelling of an epoxy resin system [Volume 3, Issue 4, 2016, Pages 351-358]
Epoxy resin
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
Epoxy resin
A review on anti-corrosion self-healing epoxy coatings [Volume 9, Issue 3, 2022, Pages 2046-2062]
Equal channel angular
Study of strengthening mechanisms in an Al-Cu-Ti metallic glass reinforced Al matrix composite consolidated by ECAP process [Volume 4, Issue 2, 2017, Pages 171-178]
Erbium
Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites [Volume 6, Issue 2, 2019, Pages 242-247]
Exact closed form solution
Exact micromechanical stress analysis of long fiber composites under uniform tensile loading [Volume 2, Issue 3, 2015, Pages 1-10]
Expanded graphite
Electrical conductivity enhancement of Carbon/Epoxy composites using nanoparticles [Volume 5, Issue 4, 2018, Pages 605-614]
Expanded graphite
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Expansion hot press
Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
Experimental design
Investigation of mechanical properties of polypropylene-based hybrid nanocomposites using experimental design [Volume 5, Issue 3, 2018, Pages 307-314]
Experimental study
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Experimental study
Experimental determination of forming limit diagram in Aluminum-Copper two-layer metallic sheets [Volume 2, Issue 4, 2015, Pages 45-50]
Experimental study
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Experimental Validation
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Exponential and Trigonometric Shear Deformation
Electro-Mechanical free vibrations analysis of composite rectangular piezoelectric nanoplate using modified shear deformation theories [Volume 4, Issue 2, 2017, Pages 151-160]
Exponential shear deformation theory
Free vibrations analaysis of functionally graded composite rectangular na-noplate based on nonlocal exponential shear deformation theory in thermal environment [Volume 4, Issue 1, 2017, Pages 109-120]
Extended finite element
Crack growth trajectory prediction in V-notched polymeric specimen under combined compressive-shear loading conditions [Volume 4, Issue 3, 2017, Pages 337-346]
Extended Finite Element Method
Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
Extended Finite Element Method
Mixed mode fatigue crack growth analysis of cracked aluminium panel repaired with composite patches using extended finite element method [Volume 3, Issue 4, 2016, Pages 321-332]
Extrinsic healing
A review on healing and mechanical behaviors of self-healable polymer matrix composites by extrinsic healing methods [Volume 6, Issue 4, 2019, Pages 549-570]
F
Fabrication
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Fatigue Analysis
Fatigue analysis of composite sandwich panel by continuum damage mechanics method with interlayer element [Volume 9, Issue 2, 2022, Pages 1952-1960]
Fatigue crack propagation
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
Fe-B
Studying influence of adding carbon and boron amount on microstructure and hardness of iron – based hardfacing layer using Flux Cored Arc Welding [Volume 5, Issue 2, 2018, Pages 245-252]
FEM
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
FEM
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
FEM
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Fe-Mn alloy
Preparation of Fe-Mn nanowire alloys and the study of the effect of manganese content, annealing and electrodeposition frequency on their magnetic properties [Volume 4, Issue 3, 2017, Pages 255-262]
FE SEM
Investigating the physical and surface properties at high temperature of the Al/SiC nanocomposite produced by powder metallurgy [Volume 2, Issue 1, 2015, Pages 33-40]
FGM
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2021, Pages 1749-1757]
FGM materials
Creep Analysis of FGM Rotating Disc with non-Uniform Profiles [Volume 1, Issue 2, 2014, Pages 29-36]
FGM Sheet
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Fiber
Fatigue life prediction of symmetric cross ply laminated composite using a developed continuum damage mechanics based model [Volume 2, Issue 1, 2015, Pages 13-22]
Fiber-matrix debonding
Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
Fiber metal laminate
Evaluation of impact strength of composites and fiber metal laminates hybridized with nanoclay after exposure to high temperature thermal shock [Volume 4, Issue 3, 2017, Pages 263-274]
Fiber metal laminate
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
Fiber metal laminate
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Fiber metal laminate
Experimental and numerical analysis of vibration of FML- stiffened circular cylindrical shell under clamp-free boundary condition [Volume 6, Issue 1, 2019, Pages 9-20]
Fiber-metal laminate
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2019, Pages 541-548]
Fiber metal laminate composite
Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers [Volume 4, Issue 4, 2017, Pages 399-404]
Fiber-metal laminate composite
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Fiber metal laminates
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2019, Pages 495-502]
Fiber metal laminates
The effect of middle layer material and thickness on the quasi-static energy absorption of FML [Volume 5, Issue 3, 2018, Pages 427-436]
Fiber metal laminates
Comparison of moisture aging effect on flexural and buckling behavior of two types of balsa core sandwich structures [Volume 8, Issue 4, 2021, Pages 1767-1779]
Fiber-metal laminates
Mechanical performance of self-healing fiber-metal laminates under transverse loading [Volume 5, Issue 2, 2018, Pages 185-190]
Fiber–metal laminates
Non-linear response of Fiber Metal Laminates subjected to temperature and dynamic loadings [Volume 7, Issue 1, 2020, Pages 768-778]
Fiber Metal Laminates (FMLs)
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Fiber Orientation
The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
Fiber-reinforced composite
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
Fiber-Reinforced Composite Material
Acoustic scattering from helically wounded fiber reinforced composite cylindrical shells:
Resonance isolation, identification and classification
and bifurcation phenomenon [Volume 6, Issue 1, 2019, Pages 167-178]
Fibers arrangement
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2019, Pages 541-548]
Fibre reinforced composite
Three dimensional modeling of progressive damage in fiber reinforced materials base on invariant failure criteria [Volume 5, Issue 2, 2018, Pages 191-199]
Field-emission scanning electron microscopy (FE-SEM)
An experimental study of the effects of carbon nanotube and graphene addition on the impact strength of Epoxy/Basalt fiber composite [Volume 6, Issue 3, 2019, Pages 411-418]
Filament winding
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2018, Pages 469-478]
Filling Pattern
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2020, Pages 1271-1278]
Finite difference (FD)
Sliding contact between a rigid cylindrical punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 2, Issue 3, 2015, Pages 11-22]
Finite element
Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
Finite element
Transient heat transfer analysis in composite metal cylindrical vessel using the layerwise theory and differential quadrature method [Volume 4, Issue 3, 2017, Pages 347-358]
Finite element
Investigation of skin/core debonding effects on the natural frequencies of composite sandwich structures using experimental and numerical modal analysis [Volume 5, Issue 1, 2018, Pages 91-98]
Finite element
Fatigue analysis of composite sandwich panel by continuum damage mechanics method with interlayer element [Volume 9, Issue 2, 2022, Pages 1952-1960]
Finite element meth
Simulated nano-indentation method for estimation of micro-residual stresses of a unidirectional composite ply [Volume 2, Issue 4, 2015, Pages 1-12]
Finite Element Method (FEM)
Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
Finite element model
Numerical and experimental study of carbon / epoxy composite laminate response to low velocity impact [Volume 8, Issue 1, 2021, Pages 1461-1472]
Finite element modeling
Experimental and Numerical Simulation of Thermography for Detection of Disbond in Repaired Aluminum by Composite Patch [Volume 6, Issue 4, 2019, Pages 591-600]
Finite element modeling
Resistance of Singly-Curved Sandwich Shells with Metal Microlattice Core under Transverse Loading [Volume 7, Issue 2, 2020, Pages 897-906]
Finite element modeling
Nondestructive evaluation of bilayer metal-composite structures using finite element simulation of guided Lamb wave propagation [Volume 8, Issue 3, 2021, Pages 1707-1700]
Finite element modeling
Evaluation of matrix cracking in cross-ply composites using the finite element simulation of guided Lamb wave propagation [Volume 10, Issue 3, 2023, Pages 2257-2265]
Finite element modeling
Nondestructive evaluation of corrosion in pipes with composite coating with the finite element simulation of guided wave propagation [Volume 10, Issue 3, 2023, Pages 2312-2319]
Finite elements method
Comparison of numerical analysis methods for progressive damage analysis in composite bolted joints and suggestion of new method for bolted joints analysis [Volume 2, Issue 2, 2015, Pages 63-70]
Finite strip method
Buckling analysis of composite cross-ply laminated plates under hygrothermal loads with delaminations using the finite strip method [Volume 5, Issue 3, 2018, Pages 437-450]
Fire resistance
Fire resistance polyurethane/poly Urea micro/Nanocomposite foams reinforced with natural zeolite/Graphite nanoplatelets (GNP) [Volume 8, Issue 3, 2021, Pages 1725-1715]
First order shear deformation plate theory
Hydroelastic vibration analysis of functionally graded circular plate in contact with bounded fluid by Ritz method [Volume 5, Issue 4, 2018, Pages 529-538]
First-order shear deformation theory
Dynamic response of FG rectangular plate in contact with stationary fluid under moving load [Volume 6, Issue 2, 2019, Pages 213-224]
First-order Shear Deformation Theory (FSDT)
Free vibration analysis of perforated composite cylindrical shell using Generalized Differential Quadrature Method [Volume 7, Issue 3, 2020, Pages 1120-1132]
First-order Shear Deformation Theory (FSDT)
Using a Multi Domain Generalized Differential Quadrature Method to Study the Effect of Crack on the Vibrational Behavior of Composite Cylindrical Shell [Volume 8, Issue 4, 2021, Pages 1749-1760]
Flax fibers
Uncertainty quantification of natural frequencies of flax/epoxy composite laminates based on a polynomial chaos expansion method [Volume 8, Issue 1, 2021, Pages 1327-1338]
Flexible core
Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
Flexural behavior
Comparison of moisture aging effect on flexural and buckling behavior of two types of balsa core sandwich structures [Volume 8, Issue 4, 2021, Pages 1767-1779]
Flexural modulus
Evaluation of variation in the mechanical properties of composite laminates using progressive failure analysis [Volume 5, Issue 1, 2018, Pages 51-60]
Flexural performance
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2019, Pages 525-532]
Flexural properties
A study on the flexural response of grid composites containing multi-walled carbon nanotubes [Volume 4, Issue 1, 2017, Pages 101-108]
Flexural properties
Effects of functionalized graphene nanoplatelets on the flexural behaviors of basalt fibers/epoxy composites [Volume 5, Issue 3, 2018, Pages 315-324]
Flexural properties
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2019, Pages 495-502]
Flexural properties
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
Flexural properties
Effect of Cryogenic Environmental Condition upon Flexural Properties of Aluminum- Epoxy/ Basalt Fibers- Glass Fibers Laminates [Volume 6, Issue 4, 2019, Pages 541-548]
Flexural properties
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Flexural properties
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
Flexural Strength
Evaluation of variation in the mechanical properties of composite laminates using progressive failure analysis [Volume 5, Issue 1, 2018, Pages 51-60]
Flexural Strength
Mechanical performance of self-healing fiber-metal laminates under transverse loading [Volume 5, Issue 2, 2018, Pages 185-190]
Flexural Strength
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2019, Pages 503-510]
Flexural Strength
Improvement of delamination resistance of glass-phenolic composites through matrix toughening mechanism using poly (vinyl butyral) [Volume 5, Issue 4, 2018, Pages 521-528]
Flexural Strength
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2021, Pages 1699-1687]
Flexural Strength
Comparison of flexural strength in rectangular shape 3D-printed PLA samples with different grooves [Volume 10, Issue 2, 2023, Pages 2210-2217]
Flourohydroxyapatite
Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application [Volume 6, Issue 3, 2019, Pages 481-490]
FML
Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact [Volume 5, Issue 3, 2018, Pages 331-342]
FML
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Foam
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Foam
Experimental study of the impact properties of foam based composites reinforced with warp-knitted spacer fabric [Volume 8, Issue 1, 2021, Pages 1353-1362]
Foaming dynamics
Experimental Investigation on the Foaming Dynamics and Cell Microstructure of Polystyrene/Nanosilica/n-Pentane Nanocomposites [Volume 5, Issue 2, 2018, Pages 289-301]
Forced Vibration
Energy Harvesting from Laminated Composite Beam with a Piezoelectric Layer under Forced Vibrations [Volume 5, Issue 2, 2018, Pages 227-237]
Formability
Experimental determination of forming limit diagram in Aluminum-Copper two-layer metallic sheets [Volume 2, Issue 4, 2015, Pages 45-50]
Fractography
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Fracture initiation angle
Experimental and theoretical fracture analysis of quasi-brittle polymer components containing V-notches with end holes under combined tensile-shear loading [Volume 2, Issue 2, 2015, Pages 41-54]
Fracture load
Experimental and theoretical fracture analysis of quasi-brittle polymer components containing V-notches with end holes under combined tensile-shear loading [Volume 2, Issue 2, 2015, Pages 41-54]
Fracture process zone
A novel approximate method for determining mixed mode I/II bridging law of laminated composites [Volume 8, Issue 4, 2021, Pages 1836-1848]
Fracture strength
Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
Fracture toughness
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Fracture toughness
The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
Fracture toughness
A review of recent studies on self-healing smart composites for application in dentistry [Volume 6, Issue 3, 2019, Pages 435-450]
Fracture toughness
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Fracture toughness
Manufacturing and evaluation of mechanical and physical properties of green geopolymer composite reinforced with kenaf fibers and carbon nanotubes [Volume 9, Issue 3, 2022, Pages 2011-2022]
Fracture toughness
Effect of GNPs debonding on mode I fracture toughness of polymeric nanocomposites [Volume 10, Issue 2, 2023, Pages 2233-2241]
Free edge
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
Free Edge Effect
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Free vibration
Free Vibration and Static Bending Analysis of Curved Sandwich Panel with Magneto-Rheological Fluid Layer in Sheets using Improved High Order Sandwich Panel Theory [Volume 1, Issue 2, 2014, Pages 49-62]
Free vibration
Analytical solution for free vibration of functionally graded carbon nanotubes (FG-CNT) reinforced double-layered nano-plates resting on elastic medium [Volume 2, Issue 3, 2015, Pages 55-66]
Free vibration
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2018, Pages 469-478]
Free vibration
Vibration analysis of boron nitride-reinforced nanocomposites embedded in elastic medium considering surface and electric field effects by using higher-order modified strain gradient theory [Volume 6, Issue 1, 2019, Pages 31-42]
Free Vibrations
Effect Of Dimensions Smart Attached Mass And Local Stiffness On Dynamic Response Of Thick Plates [Volume 4, Issue 4, 2017, Pages 443-452]
Free Vibrations
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
Free Vibrations
Analysis of free vibration of laminated composite cylindrical shells with rectangular cutout [Volume 10, Issue 2, 2023, Pages 2196-2209]
Frequency analysis
Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
Frequency analysis
On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment [Volume 6, Issue 1, 2019, Pages 143-150]
Friction coefficient
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Friction material
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Friction stir alloying
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Friction stir process
Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with Silicon carbide nanoparticles [Volume 8, Issue 4, 2021, Pages 1789-1796]
Friction Stir Processes
Investigation of Tribological Properties of Nano-Composite Copper / Titanium Dioxide Alloy Produced Using Friction-Stir Process [Volume 9, Issue 4, 2022, Pages 2067-2074]
Friction stir processing
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2015, Pages 31-36]
Friction stir processing
Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
Friction stir processing
Investigation the mechanical and microstructural propreties of copper surface composite Cu/SiO2 fabricated by friction stir processing [Volume 4, Issue 4, 2017, Pages 426-433]
Friction stir processing
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Friction stir processing (FSP)
Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing [Volume 6, Issue 3, 2019, Pages 363-373]
Friction stir processing (FSP)
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Fuel cell
Fabrication and analysis of composite bipolar plates with expanded graphite to increase electrical conductivity of fuel cells [Volume 6, Issue 3, 2019, Pages 465-472]
Functionalization
Effects of functionalized graphene nanoplatelets on the flexural behaviors of basalt fibers/epoxy composites [Volume 5, Issue 3, 2018, Pages 315-324]
Functionalized and intact CNTs
Multiscale modeling of fracture in polymer nanocomposite reinforced by intact and functionalized CNTs [Volume 4, Issue 1, 2017, Pages 35-46]
Functionally graded
Analytical solution for free vibration of functionally graded carbon nanotubes (FG-CNT) reinforced double-layered nano-plates resting on elastic medium [Volume 2, Issue 3, 2015, Pages 55-66]
Functionally graded clamped beam
Robust vibration control of a functionally graded beam with a variable cross section [Volume 2, Issue 2, 2015, Pages 17-30]
Functionally Graded Core
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Functionally graded cracked
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
Functionally graded joint
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]
Functionally graded material
Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
Functionally graded material
Free vibrations analaysis of functionally graded composite rectangular na-noplate based on nonlocal exponential shear deformation theory in thermal environment [Volume 4, Issue 1, 2017, Pages 109-120]
Functionally graded material
Hydroelastic vibration analysis of functionally graded circular plate in contact with bounded fluid by Ritz method [Volume 5, Issue 4, 2018, Pages 529-538]
Functionally graded material
Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method [Volume 6, Issue 3, 2019, Pages 335-342]
Functionally graded material
The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material [Volume 8, Issue 2, 2021, Pages 1522-1531]
Fused deposition modeling (FDM)
A review on 4D printing of polymers and polymer composites [Volume 10, Issue 1, 2023, Pages 2147-2165]
Fused Deposition Modelling (FDM)
Effect of processing parameters on tensile properties of FDM 3D printed of PLA specimens [Volume 7, Issue 2, 2020, Pages 855-862]
Fuzzy clustering
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Fuzzy Controller
Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
Fuzzy Controller
Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires [Volume 4, Issue 4, 2017, Pages 363-374]
Fuzzy fiber
Micromechanical analysis of electro-elastic response of polymer composites reinforced with fuzzy fiber containing CNTs [Volume 5, Issue 4, 2018, Pages 485-498]
G
Galerkin method
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
Galerkin method
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Galerkin method
Free vibration analysis of rectangular doubly curved auxetic-core sandwich panels integrated with CNT-reinforced composite layers using Galerkin method [Volume 8, Issue 3, 2021, Pages 1686-1677]
Gas Forming
An Investigation into the Comparison between Hot and Cold Forming of Copper-Aluminum Composite Tubes by utilizing Hydroforming and Gasforming Processes [Volume 4, Issue 2, 2017, Pages 205-218]
Gas Gun
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
Gas Tungsten arc welding
Study of microstructure and tribological behavior of the composite layer produced of silicon carbide particles on a steel ASTM A106 GTAW welding method [Volume 2, Issue 1, 2015, Pages 65-72]
Geant4 simulator
Monte Carlo simulation and determination of gamma ray protection characteristics of composites containing Bismuth Oxide and elements of Gadolinium, Titanium, Tungsten, Zirconium, Zinc and Yttrium [(Articles in Press)]
Genatic Algorithm
Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires [Volume 4, Issue 4, 2017, Pages 363-374]
Geopolymer
Manufacturing and evaluation of mechanical and physical properties of green geopolymer composite reinforced with kenaf fibers and carbon nanotubes [Volume 9, Issue 3, 2022, Pages 2011-2022]
GHM method
Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
GLARE
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Glass/Epoxy Composite
Experimental and Numerical Study of the Effect of Environmental Conditions on the Tensile Strength of Adhesive, Riveted and Hybrid Joints of E-Glass/Epoxy Composites [Volume 10, Issue 3, 2023, Pages 2273-2296]
Glass fiber
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
Glass fiber reinforced composite
Study of the effect of machining parameters on delamination in rotary ultrasonic machining process of glass fiber reinforced polymer composite by diamond core tool [Volume 4, Issue 1, 2017, Pages 67-74]
Glass-phenolic Composites
Improvement of delamination resistance of glass-phenolic composites through matrix toughening mechanism using poly (vinyl butyral) [Volume 5, Issue 4, 2018, Pages 521-528]
Global buckling
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Graded materials
Numerical investigation of the material gradient using different stiffness functions by consideration of the graded stiffness of the dragonfly wing membrane [Volume 8, Issue 1, 2021, Pages 1307-1316]
Graphene
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
Graphene
Effects of functionalized graphene nanoplatelets on the flexural behaviors of basalt fibers/epoxy composites [Volume 5, Issue 3, 2018, Pages 315-324]
Graphene
Experimental investigation on mechanical properties of hybrid nano-composite based on epoxy/ graphene nano-platelets/ carboxylated acrylonitrile butadiene rubber [Volume 5, Issue 3, 2018, Pages 395-402]
Graphene
An Experimental Investigation of Quasi-Static Indentation on A Composite Sandwich Panel Made of Basalt Fiber Using Nano-Graphene [Volume 6, Issue 1, 2019, Pages 109-118]
Graphene
A multi-scale cubic model to calculate the elastic modules of the graphene/polymer nano composites [Volume 7, Issue 1, 2020, Pages 740-746]
Graphene
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2020, Pages 1197-1206]
Graphene
Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with mechanical and electromagnetic stirring [Volume 8, Issue 2, 2021, Pages 1532-1542]
Graphene nanocomposites
Effect of damping on nonlinear forced vibration response of graphene-based nanocomposites [Volume 4, Issue 2, 2017, Pages 141-150]
Graphene nanoparticles
Effect of GNPs debonding on mode I fracture toughness of polymeric nanocomposites [Volume 10, Issue 2, 2023, Pages 2233-2241]
Graphene nano-platelets
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Graphene nanoplatelets
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
Graphene oxide
Experimental study of the compression behavior of Graphene Oxide and Nano-clay reinforced polycarbonate nanocomposites at low strain rates [Volume 6, Issue 3, 2019, Pages 427-434]
Graphene Oxide (GO)
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Graphene oxide nanoparticles
Fabrication and characterization of reduced graphene oxide-cobalt (rGO-Co) composite nanoparticlesfor use in hyperthermia [Volume 9, Issue 3, 2022, Pages 2023-2032]
Graphite
Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
Graphite particle
Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
Grid composite plate
Experimental and numerical investigation of the effect of longitudinal and horizontal ribs on flexural behavior of grid stiffened composite plates [Volume 3, Issue 4, 2016, Pages 333-342]
Grooved foam
Fabrication of sandwich panels with glass/vinylester composite face-sheets and polyvinyl chloride (PVC) lattice core using vacuum infusion process for marine applications [Volume 10, Issue 1, 2023, Pages 2166-2175]
Guided waves
Nondestructive evaluation of bilayer metal-composite structures using finite element simulation of guided Lamb wave propagation [Volume 8, Issue 3, 2021, Pages 1707-1700]
Guided waves
Evaluation of matrix cracking in cross-ply composites using the finite element simulation of guided Lamb wave propagation [Volume 10, Issue 3, 2023, Pages 2257-2265]
Guided waves
Nondestructive evaluation of corrosion in pipes with composite coating with the finite element simulation of guided wave propagation [Volume 10, Issue 3, 2023, Pages 2312-2319]
H
Halloysite Nanotube
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Hardness
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2018, Pages 575-582]
Hardness
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Hardness
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Hardness
The effect of Inconel 625 value on mechanical and tribological properties of PTFE-based composites: Experimental and molecular dynamics simulation studies [Volume 8, Issue 4, 2021, Pages 1797-1805]
Hardness
Investigating the effect of the shot peening process on the properties and quality of Al-Al2O3 composite coating created by cold spraying [Volume 9, Issue 3, 2022, Pages 2006-2010]
Hardness Behavior
Investigating the mechanical behavior and microstructure of basalt fibers-aluminum composite fabricated by thixomixing method [Volume 10, Issue 1, 2023, Pages 2184-2192]
Hashin criteria
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Hashin’s 3D damage model
Experimental and numerical investigation of buckling and post-buckling behavior of filament wound composite cylinders under lateral compression loading by parallel rigid plates [Volume 6, Issue 1, 2019, Pages 151-166]
HDPE/rPET/wood composites
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate): part Ⅱ, Constrained Optimization [Volume 6, Issue 1, 2019, Pages 119-126]
Healing efficiency
Mechanical performance of self-healing fiber-metal laminates under transverse loading [Volume 5, Issue 2, 2018, Pages 185-190]
Heat Activation
Investigation of the Effect of 3D printing parameters on shape-shifting of flat sturctures to Three-Dimensional Shapes [Volume 7, Issue 4, 2020, Pages 1271-1278]
Heating cycle
Experimental Study of the mechanical behavior of self-healing polymer composite under heating cycles [Volume 6, Issue 2, 2019, Pages 183-189]
Heat Transfer Analysis
Transient heat transfer analysis in composite metal cylindrical vessel using the layerwise theory and differential quadrature method [Volume 4, Issue 3, 2017, Pages 347-358]
Heat treatment
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2021, Pages 1749-1757]
Heaviside function
Analysis of free vibration of laminated composite cylindrical shells with rectangular cutout [Volume 10, Issue 2, 2023, Pages 2196-2209]
Helical milling
Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite [Volume 2, Issue 4, 2015, Pages 51-58]
High density polyethylene
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate) [Volume 5, Issue 1, 2018, Pages 127-134]
High density polyethylene/HDPE High density polyethylene
Effect of methylene diphenyl diisocyanate and maleic anhydride grafted polypropylene on morphology and physical-mechanical properties of polyethylene based wood-plastic composites containing nanosilica and nanoclay [(Articles in Press)]
Higher-order modified strain gradient theory
Vibration analysis of boron nitride-reinforced nanocomposites embedded in elastic medium considering surface and electric field effects by using higher-order modified strain gradient theory [Volume 6, Issue 1, 2019, Pages 31-42]
High-order modified theory
Free vibration analysis of sandwich plates with magnetorheological smart fluid core by Using modified shear deformation theory [Volume 8, Issue 4, 2021, Pages 1826-1835]
High Order Theory
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
High Speed Machining
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
High Strain Rate
A numerical analysis on effect of impedance and thickness of various layers on deflection of target plate in layered armor systems under explosive loading [Volume 1, Issue 2, 2014, Pages 11-20]
High Strain Rate
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
High-temperature tensile
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
High temperature thermal shock
Evaluation of impact strength of composites and fiber metal laminates hybridized with nanoclay after exposure to high temperature thermal shock [Volume 4, Issue 3, 2017, Pages 263-274]
High velocity impact
Finite element simulation of high velocity impact on polymer composite plates [Volume 5, Issue 2, 2018, Pages 157-168]
High velocity impact
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
High velocity impact
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2018, Pages 511-520]
High velocity impact
The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration [Volume 6, Issue 4, 2019, Pages 533-540]
High velocity impact
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
High velocity impact
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
High velocity impact
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
High velocity impact
The effect of Shape memory wire on the ballistic behavior of smart corrugated core sandwich panels [Volume 8, Issue 2, 2021, Pages 1612-1627]
Hole diameter
Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite [Volume 2, Issue 4, 2015, Pages 51-58]
Holed laminated composite
Damage analysis of holed composite laminates using continuum damage mechanics [Volume 2, Issue 3, 2015, Pages 22-34]
Hollow Cylinder
Exact solution of steady nonlinear heat conduction in exponentially graded cylindrical and spherical shells with temperature-dependent properties [Volume 3, Issue 3, 2016, Pages 301-306]
Homogenization
A novel model for homogenization of multi-phase composites with high volume fraction of inclusions [Volume 4, Issue 2, 2017, Pages 195-204]
Honeycomb
Experimental and numerical investigation of sandwich panels with bilateral connection under static loading [Volume 5, Issue 3, 2018, Pages 415-426]
Honeycomb
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2018, Pages 511-520]
Honeycomb cores
Experimental study of bond strength between core and composite layers under tensile and shear loads in different methods of fabricating nucleate composite structures [Volume 8, Issue 3, 2021, Pages 1667-1659]
Hot gas forming
Experimental and Finite Element Investigation of Hot Gas Forming Process of A6063-AZ80 Bi-layered Composite Tubes using Taguchi Methods for Design of Experiments [Volume 5, Issue 1, 2018, Pages 79-90]
Hot press
Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
Hot Rolling
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2018, Pages 575-582]
Hot Rolling
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Hybrid
Finite element simulation of high velocity impact on polymer composite plates [Volume 5, Issue 2, 2018, Pages 157-168]
Hybrid
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Hybrid adhesive-riveted joint
Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive- riveted joints [Volume 2, Issue 2, 2015, Pages 71-78]
Hybrid composite
Hybridization effect of fibers reinforcement on tensile properties of epoxy composites [Volume 1, Issue 2, 2014, Pages 21-28]
Hybrid composite
The investigation and comparison of mechanical propertise and microstructure Al/CNT and Al/CNT/Al2O3 copmosites produced by mixed accumulative roll bounding [Volume 4, Issue 4, 2017, Pages 464-470]
Hybrid composite
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2019, Pages 525-532]
Hybrid composite
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
Hybrid core
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Hybrid joints
Experimental and Numerical Study of the Effect of Environmental Conditions on the Tensile Strength of Adhesive, Riveted and Hybrid Joints of E-Glass/Epoxy Composites [Volume 10, Issue 3, 2023, Pages 2273-2296]
Hybrid method
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Hybrid nanocomposite
Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models [Volume 6, Issue 2, 2019, Pages 283-293]
Hybrid sandwich panel
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Hydroforming Process
Optimization of internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm [Volume 4, Issue 3, 2017, Pages 275-282]
Hydrophobicity
Self-cleaning properties and free surface energy of ethylene vinyl acetate (EVA) nanocomposite coatings reinforced with silica nanoparticles [Volume 8, Issue 3, 2021, Pages 1736-1726]
Hydroxyapatite
Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite [Volume 2, Issue 2, 2015, Pages 9-16]
Hydroxyapatite
Effect of Nitinol Addition on the Mechanical properties and the Microstructure of Nactural Hydroxyapatite Obtained from Calf Femoral Bone [Volume 5, Issue 2, 2018, Pages 238-244]
Hydroxyapatite
Design, preparation, characterization and biological investigation of Sodium Alginate/ Flourohydroxyapatite composite scaffold for bone tissue engineering application [Volume 6, Issue 3, 2019, Pages 481-490]
Hydroxyapatite
Life cycle estimation of notched polymer base dental composites reinforced with nanoparticles [Volume 9, Issue 2, 2022, Pages 1983-1989]
Hygrothermal loads
Buckling analysis of composite cross-ply laminated plates under hygrothermal loads with delaminations using the finite strip method [Volume 5, Issue 3, 2018, Pages 437-450]
Hyperelastic
Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models [Volume 6, Issue 2, 2019, Pages 283-293]
Hyperthermia
Fabrication and characterization of reduced graphene oxide-cobalt (rGO-Co) composite nanoparticlesfor use in hyperthermia [Volume 9, Issue 3, 2022, Pages 2023-2032]
I
Illyushin’s approximation method
Bending and buckling solution of composite viscoelastic plate using the generalized exponential basis function method [Volume 6, Issue 2, 2019, Pages 190-199]
Impact
Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
Impact
Experimental, numerical and analytical study of energy absorption in high velocity penetration phenomena on composite targets. [Volume 5, Issue 1, 2018, Pages 11-24]
Impact
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Impact
Experimental investigation of impact properties of cell structures patterned from animal shells [Volume 10, Issue 2, 2023, Pages 2225-2232]
Impact acceleration
Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
Impact model
Parametric impact analysis on cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 9, Issue 4, 2022, Pages 2099-2115]
Impactor Shape
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Impact peroperties
Numerical Investigation of the Parameters Affecting on the Composite Tubes Response under Axial Impact [Volume 6, Issue 2, 2019, Pages 200-212]
Impact properties
Evaluation of impact strength of composites and fiber metal laminates hybridized with nanoclay after exposure to high temperature thermal shock [Volume 4, Issue 3, 2017, Pages 263-274]
Impact resistance
Energy absorption of polyester/kenaf fiber/carbon black hybrid composites affected by fibers aspect ratio [Volume 8, Issue 4, 2021, Pages 1861-1871]
Impact strength
A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene (PP/LLDPE) blends [Volume 4, Issue 4, 2017, Pages 386-390]
Impact strength
Investigation of mechanical properties of polypropylene-based hybrid nanocomposites using experimental design [Volume 5, Issue 3, 2018, Pages 307-314]
Impact strength
Damages Evaluation of low velocity impact on Glass/Polyester-foam sandwich panels using the Acoustic Technique [Volume 6, Issue 2, 2019, Pages 319-329]
Impact strength
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Imperfection
Ultimate strength analysis of imperfect composite plates under both in-plane compressive load and lateral pressure using Ritz method [Volume 5, Issue 1, 2018, Pages 1-10]
Imperialist Competitive Algorithm
Determination of Optimal Parameters for Orthotropic Plates with Pentagonal Cutout by Imperialist Competitive Algorithm [Volume 4, Issue 2, 2017, Pages 161-170]
Impregnation
Investigation of thermoplastic pultrusion for tubular product production using prepregs [Volume 2, Issue 1, 2015, Pages 23-32]
Impregnation model Composite
Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
Impregnation Ratio
Visualization of Flow & Void In pultrusion Process of thermoplastic composites [Volume 4, Issue 4, 2017, Pages 453-463]
Improved High Order Theory
Free Vibration and Static Bending Analysis of Curved Sandwich Panel with Magneto-Rheological Fluid Layer in Sheets using Improved High Order Sandwich Panel Theory [Volume 1, Issue 2, 2014, Pages 49-62]
Improved Spring-mass model
Analytical investigation of Low-Velocity Oblique Impact on Composite Cylindrical Shells [Volume 7, Issue 3, 2020, Pages 1106-1119]
Induced Delamination
Matrix Cracking and Induced Delamination in Symmetrically Laminated Composites Subjected to Static Loading by using Multi Scale Damage Mechanics [Volume 4, Issue 1, 2017, Pages 9-24]
Induced Delamination
Prediction of damage propagation in cross-ply laminated composites subjected to uniaxial tensile loading [Volume 9, Issue 1, 2022, Pages 1911-1893]
Infiltration-Casting
Feasibility of Production of an iron-base Metal Matrix Composite by Infiltration of molten Gray Cast Iron into a 304 Stainless Steel Porous Skeleton [Volume 8, Issue 3, 2021, Pages 1658-1653]
Innegra synthetic fiber
Experimental investigation of charpy impact in energy absorption of hybrid and non-hybrid sandwich structures reinforced with carbon nanofiber [Volume 9, Issue 1, 2022, Pages 1920-1912]
Insertion loss
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
In-situ composite"
Study of the phase transformations in Al-V2O5 composite fabricated by spark plasma sintering process [Volume 7, Issue 2, 2020, Pages 949-960]
In-Situ Composite
Fabrication and phases study in Al/(Al2O3+AlxVy+AlaNib) in situ composite [Volume 4, Issue 3, 2017, Pages 303-310]
In-situ hybrid composite
Effect of heat treatment on microstructure and wear behavior of in-situ formed Al 3003/Al3Zr+ Al3Ti composite fabricated via friction stir processing [Volume 6, Issue 3, 2019, Pages 363-373]
Intact
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Interface fracture
Experimental mixed-mode fracture study in the interface of vertebrae bone tissue-hydroxyapatite cement using the bi-material Brazilian disc specimen [Volume 8, Issue 2, 2021, Pages 1583-1589]
Interlaminar fracture toughness
Investigation of thermal fatigue effects on crack propagation and mode I delamination of multilayer laminated composites using digital image correlation [Volume 8, Issue 3, 2021, Pages 1652-1643]
Interlaminar shear strength
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
Interlaminar Stresses
Analysis of interlaminar stresses in cross-ply composite cylinders subjected to radial loads [Volume 2, Issue 3, 2015, Pages 43-54]
Intermetallic And Ceramic Compounds
Fabrication and phases study in Al/(Al2O3+AlxVy+AlaNib) in situ composite [Volume 4, Issue 3, 2017, Pages 303-310]
Intermetallic Compound
Melt-Solid-Gas behavior in the interface of Al/Mg composite produced by centrifugal casting [Volume 2, Issue 3, 2015, Pages 75-82]
Intermetallic Compound
Interface characterization of Al/cast iron composite [Volume 3, Issue 3, 2016, Pages 261-268]
Intermetallic Compound
Interface characterization of aluminum-copper bimetal composite produced via centrifugal casting [Volume 3, Issue 4, 2016, Pages 343-350]
Interphase
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Interphase
Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite transverse mechanical properties [Volume 6, Issue 4, 2019, Pages 511-524]
Interphase layer
A developed micromechanical model to predict electrical properties of polymer nanocomposites containing carbon nanotubes [Volume 9, Issue 2, 2022, Pages 1961-1969]
Intra-ply hybrid
Numerical modeling of bending behavior of intra-ply hybrid composites using finite element method [Volume 2, Issue 4, 2015, Pages 59-66]
Invariant
Three dimensional modeling of progressive damage in fiber reinforced materials base on invariant failure criteria [Volume 5, Issue 2, 2018, Pages 191-199]
Iran-Matrix Composites
Feasibility of Production of an iron-base Metal Matrix Composite by Infiltration of molten Gray Cast Iron into a 304 Stainless Steel Porous Skeleton [Volume 8, Issue 3, 2021, Pages 1658-1653]
Iron oxide
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Isocyanate modification
Isocyanate modification of rice husk for using in polyurethane foam composite [Volume 9, Issue 4, 2022, Pages 2083-2088]
Isogrid composite
An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
J
Jeffamine
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
J-Integral
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
K
Kantrovich Method
An Experimental Investigation on the Effect of 3-D Stresses at Free Edges on the Failure of Composite Laminates under Distributed Lateral Load [Volume 7, Issue 2, 2020, Pages 843-854]
Kenaf fiber
Manufacturing and evaluation of mechanical and physical properties of green geopolymer composite reinforced with kenaf fibers and carbon nanotubes [Volume 9, Issue 3, 2022, Pages 2011-2022]
Kevlar
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Kevlar/Epoxy composite
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Kevlar fibers
The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration [Volume 6, Issue 4, 2019, Pages 533-540]
L
Ladeveze damage theory
Failure analysis of composite wing adhesive joints using 3D cohesive interface element [Volume 2, Issue 2, 2015, Pages 31-40]
Ladeveze model
Damage analysis of holed composite laminates using continuum damage mechanics [Volume 2, Issue 3, 2015, Pages 22-34]
Lamb wave
Nondestructive evaluation of bilayer metal-composite structures using finite element simulation of guided Lamb wave propagation [Volume 8, Issue 3, 2021, Pages 1707-1700]
Lamb wave
Evaluation of matrix cracking in cross-ply composites using the finite element simulation of guided Lamb wave propagation [Volume 10, Issue 3, 2023, Pages 2257-2265]
Laminate composite
Experimental investigation of the effect effective of factors and parameters on the punch on the properties of quasi-static punching shear the glass/epoxy composite [Volume 2, Issue 4, 2015, Pages 13-22]
Laminated composite
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
Laminated composite
Investigation of thermal fatigue effects on crack propagation and mode I delamination of multilayer laminated composites using digital image correlation [Volume 8, Issue 3, 2021, Pages 1652-1643]
Laminated composite
A novel approximate method for determining mixed mode I/II bridging law of laminated composites [Volume 8, Issue 4, 2021, Pages 1836-1848]
Laminated Composite Beam
Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
Laminated Composite Cylinder
Analysis of interlaminar stresses in cross-ply composite cylinders subjected to radial loads [Volume 2, Issue 3, 2015, Pages 43-54]
Laminated composite material
Geometrically nonlinear analysis of moderately thick curved composite panels under lateral load [Volume 2, Issue 1, 2015, Pages 53-64]
Laminated composites
Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
Laminated composites
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]
Laminated composites
Modeling and analysis of mechanical behavior of drilled laminated composites subjected to tensile and compressive loads [Volume 9, Issue 3, 2022, Pages 2033-2045]
Lap joint
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]
Lap shear joint
Investigating the strength of the ultrasonic welding of the polyamide 6 continuous fiber glass composite [Volume 10, Issue 1, 2023, Pages 2176-2183]
Large deformation
Geometrically nonlinear analysis of moderately thick curved composite panels under lateral load [Volume 2, Issue 1, 2015, Pages 53-64]
Large scale bridging
Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using inverse method [Volume 4, Issue 1, 2017, Pages 83-90]
Laser welding
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Lateral pressure
Ultimate strength analysis of imperfect composite plates under both in-plane compressive load and lateral pressure using Ritz method [Volume 5, Issue 1, 2018, Pages 1-10]
LATEX
Tensile properties of flexible latex-based composites reinforced by cotton fibers in the presence of shape memory alloys [Volume 8, Issue 4, 2021, Pages 1780-1788]
Lattice Composite Plates
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2021, Pages 1699-1687]
Lattice truncated cone
Experimental and numerical analysis of composite lattice truncated conical structures with and without carbon nanotube reinforcements under axial compressive force [Volume 4, Issue 4, 2017, Pages 418-425]
Layered Al/Cu composite
Investigation of mechanical properties, fracturgeraphi and microstructure of layered Al/Cu composite produced by cold roll bonding [Volume 4, Issue 3, 2017, Pages 311-318]
Layered Composite
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Layer Wise
Development of the Virtual Crack Closure Technique using Layer Wise theory for Delamination Propagation of a Composite Beam in Mode I [Volume 8, Issue 1, 2021, Pages 1443-1452]
Layer-wise theory
Analysis of interlaminar stresses in cross-ply composite cylinders subjected to radial loads [Volume 2, Issue 3, 2015, Pages 43-54]
Layer-wise theory
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
Layout
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Least squares technique
Post-buckling analysis of anti-symmetric cross-ply composite plates under end-shortening [Volume 2, Issue 3, 2015, Pages 35-42]
Life prediction
Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
Light transmission
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
Limit speed
Creep Analysis of FGM Rotating Disc with non-Uniform Profiles [Volume 1, Issue 2, 2014, Pages 29-36]
Limit state function
Reliability analysis of the delamination onset and growth due to the matrix cracking in general composite laminates [Volume 8, Issue 1, 2021, Pages 1397-1410]
Linear buckling
Investigating effect of Nano-additives orientations on buckling strength of polymeric Nanocomposite plates reinforced by CNT and Nanoclay [Volume 8, Issue 2, 2021, Pages 1590-1602]
Linear elasticity
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
Linear variation of fiber orientation
Buckling of composite plate made of curvilinear fiber with linear and nonlinear fiber orientation variation [Volume 4, Issue 4, 2017, Pages 405-417]
Linear vibration
The effect of fluid column pressure on the natural frequencies of an annular sector plate made of functionally graded material [Volume 8, Issue 2, 2021, Pages 1522-1531]
Liquid flow front
Visualization of Flow & Void In pultrusion Process of thermoplastic composites [Volume 4, Issue 4, 2017, Pages 453-463]
Loading quasi-static
Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
Local Stiffness
Effect Of Dimensions Smart Attached Mass And Local Stiffness On Dynamic Response Of Thick Plates [Volume 4, Issue 4, 2017, Pages 443-452]
Long-fiber composites
Exact micromechanical stress analysis of long fiber composites under uniform tensile loading [Volume 2, Issue 3, 2015, Pages 1-10]
Long fiber laminated composites
Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
Longitudinal damping coefficient
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
Long-term creep
The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
Low-cycle fatigue
Study of cyclic behavior, displacement-controlled low-cycle fatigue lifetime and failure in open-hole polymer-matrix composite reinforced by carbon fibers under various loading rates and amplitudes [Volume 8, Issue 1, 2021, Pages 1373-1386]
Low velocity impact
A semi-empirical model to predict the low-velocity impact behavior of weft-knitted spacer fabrics reinforced composites [Volume 5, Issue 1, 2018, Pages 117-126]
Low velocity impact
Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact [Volume 5, Issue 3, 2018, Pages 331-342]
Low velocity impact
Response of aluminum foam sandwiches under low rate impact [Volume 5, Issue 2, 2018, Pages 177-184]
Low velocity impact
An experimental investigation of the low velocity impact behavior of woven carbon-fiber-epoxy composites [Volume 6, Issue 4, 2019, Pages 571-580]
Low velocity impact
Experimental and numerical analysis of low-velocity impact on composite sandwich panels with grid stiffened core [Volume 6, Issue 4, 2019, Pages 615-626]
Low velocity impact
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Low velocity impact
Experimental study of the effect of impact shape and skin layout on the behavior of aluminum foam core sandwich panels at low velocity impact load [Volume 7, Issue 4, 2020, Pages 1153-1162]
Low velocity impact
Experimental study of the impact properties of foam based composites reinforced with warp-knitted spacer fabric [Volume 8, Issue 1, 2021, Pages 1353-1362]
Low-velocity Impact
The effect of graphene nanoparticles on the strength of sandwich panel structure under quasi-static loading and low-velocity impact [Volume 9, Issue 3, 2022, Pages 1994-2005]
Low-velocity impact (LVI)
Numerical and experimental study of carbon / epoxy composite laminate response to low velocity impact [Volume 8, Issue 1, 2021, Pages 1461-1472]
Low-velocity transverse impact
Parametric impact analysis on cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 9, Issue 4, 2022, Pages 2099-2115]
Lozenge core
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2018, Pages 469-478]
LS-DYNA
A numerical analysis on effect of impedance and thickness of various layers on deflection of target plate in layered armor systems under explosive loading [Volume 1, Issue 2, 2014, Pages 11-20]
LS-DYNA
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy composite plates [Volume 6, Issue 2, 2019, Pages 265-274]
Lubrication
On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment [Volume 6, Issue 1, 2019, Pages 143-150]
M
Machinability
Study of tool flank wear and surface quality in milling of Al520-MMCs reinforced with SiC and Sn particles [Volume 9, Issue 2, 2022, Pages 1970-1975]
Machining
On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment [Volume 6, Issue 1, 2019, Pages 143-150]
Machining
Study the effects of cutting speed and Cryogenic lubrication parameters on the surface roughness when milling A356-10%SiC [Volume 10, Issue 2, 2023, Pages 2242-2246]
Machining
Study Tool wear in Cryogenic milling of A356-10%SiC [Volume 10, Issue 3, 2023, Pages 2251-2256]
Machining force
Study of delamination in the process helical milling of carbon fiber-reinforced polymer composite [Volume 2, Issue 4, 2015, Pages 51-58]
Machining parameters
Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites [Volume 5, Issue 1, 2018, Pages 41-50]
Macromechnic Model
Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
Magnesium AZ31B
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Magnesium. Magnesium matrix composite
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2018, Pages 575-582]
Magnesium matrix nanocomposites
Effect of milling time on microstructural characteristics of Mg-20 %vol SiC composite produced by mechanical milling [Volume 4, Issue 2, 2017, Pages 135-140]
Magnetic Properties
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Magnetoreorological fluid
Free vibration analysis of sandwich plates with magnetorheological smart fluid core by Using modified shear deformation theory [Volume 8, Issue 4, 2021, Pages 1826-1835]
Magneto-Rheological
Free Vibration and Static Bending Analysis of Curved Sandwich Panel with Magneto-Rheological Fluid Layer in Sheets using Improved High Order Sandwich Panel Theory [Volume 1, Issue 2, 2014, Pages 49-62]
Magnetorheological layer
Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
Maleic Anhydride Polypropylene
Effect of methylene diphenyl diisocyanate and maleic anhydride grafted polypropylene on morphology and physical-mechanical properties of polyethylene based wood-plastic composites containing nanosilica and nanoclay [(Articles in Press)]
Manufacturing methods
Experimental study of bond strength between core and composite layers under tensile and shear loads in different methods of fabricating nucleate composite structures [Volume 8, Issue 3, 2021, Pages 1667-1659]
Marine application of composites
Fabrication of sandwich panels with glass/vinylester composite face-sheets and polyvinyl chloride (PVC) lattice core using vacuum infusion process for marine applications [Volume 10, Issue 1, 2023, Pages 2166-2175]
Material Characterization
Acoustic scattering from helically wounded fiber reinforced composite cylindrical shells:
Resonance isolation, identification and classification
and bifurcation phenomenon [Volume 6, Issue 1, 2019, Pages 167-178]
Matrix
Fatigue life prediction of symmetric cross ply laminated composite using a developed continuum damage mechanics based model [Volume 2, Issue 1, 2015, Pages 13-22]
Matrix Cracking
Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
Matrix Cracking
Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
Matrix Cracking
Matrix Cracking and Induced Delamination in Symmetrically Laminated Composites Subjected to Static Loading by using Multi Scale Damage Mechanics [Volume 4, Issue 1, 2017, Pages 9-24]
Matrix Cracking
Prediction of damage propagation in cross-ply laminated composites subjected to uniaxial tensile loading [Volume 9, Issue 1, 2022, Pages 1911-1893]
Matrix cracks
Evaluation the energy release rate of induced delamination due to matrix cracking in symmetric composite laminate [Volume 6, Issue 1, 2019, Pages 53-68]
Mechanical alloying
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2021, Pages 1817-1825]
Mechanical and Electromagnetic Stirring
Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with mechanical and electromagnetic stirring [Volume 8, Issue 2, 2021, Pages 1532-1542]
Mechanical and physical properties
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate) [Volume 5, Issue 1, 2018, Pages 127-134]
Mechanical interference
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]
Mechanical joint
A novel model to predict the mechanical behavior of single-lap composite joints [Volume 6, Issue 1, 2019, Pages 89-98]
Mechanical joint
Experimental, Numerical Investigation and Optimization of Effect of Adhesive Joint on Flexural Behavior of grid-stiffened Composite Plates [Volume 8, Issue 3, 2021, Pages 1699-1687]
Mechanical joints
Comparison of numerical analysis methods for progressive damage analysis in composite bolted joints and suggestion of new method for bolted joints analysis [Volume 2, Issue 2, 2015, Pages 63-70]
Mechanical milling
Effect of milling time on microstructural characteristics of Mg-20 %vol SiC composite produced by mechanical milling [Volume 4, Issue 2, 2017, Pages 135-140]
Mechanical milling
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Mechanical properties
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2015, Pages 31-36]
Mechanical properties
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Mechanical properties
Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
Mechanical properties
Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2016, Pages 419-428]
Mechanical properties
Investigation of mechanical properties, fracturgeraphi and microstructure of layered Al/Cu composite produced by cold roll bonding [Volume 4, Issue 3, 2017, Pages 311-318]
Mechanical properties
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
Mechanical properties
Investigation the mechanical and microstructural propreties of copper surface composite Cu/SiO2 fabricated by friction stir processing [Volume 4, Issue 4, 2017, Pages 426-433]
Mechanical properties
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Mechanical properties
The investigation and comparison of mechanical propertise and microstructure Al/CNT and Al/CNT/Al2O3 copmosites produced by mixed accumulative roll bounding [Volume 4, Issue 4, 2017, Pages 464-470]
Mechanical properties
Experimental investigation on mechanical properties of hybrid nano-composite based on epoxy/ graphene nano-platelets/ carboxylated acrylonitrile butadiene rubber [Volume 5, Issue 3, 2018, Pages 395-402]
Mechanical properties
Effect of Nitinol Addition on the Mechanical properties and the Microstructure of Nactural Hydroxyapatite Obtained from Calf Femoral Bone [Volume 5, Issue 2, 2018, Pages 238-244]
Mechanical properties
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Mechanical properties
Mechanical properties of laminated composites reinforced by natural fibers of cotton, wool and kenaf under tensile, flexural and shear loadings [Volume 6, Issue 1, 2019, Pages 99-108]
Mechanical properties
Influence of nanostructured FeAl powder addition on mechanical properties of WC composites produced by Spark plasma sintering technique [Volume 6, Issue 2, 2019, Pages 225-233]
Mechanical properties
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Mechanical properties
Analysis of tensile failure mode and the mechanism dominated over polymer composite degradation [Volume 6, Issue 4, 2019, Pages 601-608]
Mechanical properties
Effect of loading rate on the mechanical behavior of glass fiber and glass
fiber/polymer composites [Volume 8, Issue 1, 2021, Pages 1283-1306]
Mechanical properties
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Mechanical properties
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Mechanical properties
Production of high strength metallic foil by accumulative roll bonding process [Volume 7, Issue 3, 2020, Pages 1076-1082]
Mechanical properties
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Mechanical properties
Evaluation of mechanical properties and fracture toughness of aluminum-magnesium-aluminum composite produced by cold roll bonding process [Volume 8, Issue 1, 2021, Pages 1317-1326]
Mechanical properties
Effect of carbonaceous hybrid reinforcement and extrusion temperature on the microstructure and mechanical properties of AA7075 matrix hybrid composite prepared by semi-solid casting [Volume 8, Issue 1, 2021, Pages 1339-1352]
Mechanical properties
Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes [Volume 8, Issue 1, 2021, Pages 1453-1460]
Mechanical properties
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2021, Pages 1749-1757]
Mechanical properties
Investigation of curing time and temperature effects on mechanical properties and thermal degradation of artificial leather made of PVC [Volume 10, Issue 1, 2023, Pages 2132-2137]
Mechanical properties
Feasibility of using lead-acid battery separators as additives in polyethylene composites [Volume 9, Issue 4, 2022, Pages 2075-2082]
Mechanical properties
Investigating the mechanical behavior and microstructure of basalt fibers-aluminum composite fabricated by thixomixing method [Volume 10, Issue 1, 2023, Pages 2184-2192]
Mechanical properties
Investigating the effect of modified silica fume on the mechanical behavior of basalt fibers-epoxy composites under bending and tensile loading [Volume 10, Issue 2, 2023, Pages 2218-2224]
Mechanical properties
Manufacturing and investigation of mechanical properties of aluminum matrix composite materials reinforced with short carbon fibers using powder metallurgy method [(Articles in Press)]
Mechanical properties recovery
A review on healing and mechanical behaviors of self-healable polymer matrix composites by extrinsic healing methods [Volume 6, Issue 4, 2019, Pages 549-570]
Mechanical Strength
Extraction of Mechanical Properties of Carbon Nanotubes in water Based Polymer latex for Application in Petroleum Well Cementing [Volume 8, Issue 4, 2021, Pages 1758-1766]
Mechanochemical processing
Production and characterization of Cobalt/Vanadium Boride composite powder by mechanochemical method and acid leaching [Volume 4, Issue 1, 2017, Pages 75-82]
Melt fluidity
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Melt fluidity
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Mesoporous silica
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Metal Composite Tubes
Optimization of internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm [Volume 4, Issue 3, 2017, Pages 275-282]
Metal Matrix Composite
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Metal Matrix Composite
Review of mechanical and microstructural properties of aluminum matrix composites reinforced with ceramic particles produced by SPD processes [Volume 5, Issue 4, 2018, Pages 583-594]
Metal Matrix Composite
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Metal Matrix Composite
Study of tool flank wear and surface quality in milling of Al520-MMCs reinforced with SiC and Sn particles [Volume 9, Issue 2, 2022, Pages 1970-1975]
Metal Matrix Composite
Investigating the mechanical behavior and microstructure of basalt fibers-aluminum composite fabricated by thixomixing method [Volume 10, Issue 1, 2023, Pages 2184-2192]
Metal Matrix Composite
Study the effects of cutting speed and Cryogenic lubrication parameters on the surface roughness when milling A356-10%SiC [Volume 10, Issue 2, 2023, Pages 2242-2246]
Metal Matrix Composite
Study Tool wear in Cryogenic milling of A356-10%SiC [Volume 10, Issue 3, 2023, Pages 2251-2256]
Metal matrix composite materials
Manufacturing and investigation of mechanical properties of aluminum matrix composite materials reinforced with short carbon fibers using powder metallurgy method [(Articles in Press)]
Methylene diphenyl diisocyanate
Effect of methylene diphenyl diisocyanate and maleic anhydride grafted polypropylene on morphology and physical-mechanical properties of polyethylene based wood-plastic composites containing nanosilica and nanoclay [(Articles in Press)]
Mg-Al composite
Effect of solid ring preheating and cooling conditions on bonding of Mg-Al composite produced by centrifugal casting [Volume 3, Issue 1, 2016, Pages 85-92]
Mg-based biocomposite
Investigating the effects of shot peening and Polycaprolactone (PCL) electrospinning surface treatments on the corrosion properties of Mg-2.5٪HA biocomposite [Volume 10, Issue 3, 2023, Pages 2266-2272]
Microcapsule
A numerical study on crack closure using a combination of self-healing microcapsules and shape memory alloy wires [Volume 8, Issue 4, 2021, Pages 1806-1816]
Microcapsules
A review on anti-corrosion self-healing epoxy coatings [Volume 9, Issue 3, 2022, Pages 2046-2062]
Microcellular nanocomposite
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
Microcomposites
Energy absorption of polyester/kenaf fiber/carbon black hybrid composites affected by fibers aspect ratio [Volume 8, Issue 4, 2021, Pages 1861-1871]
Micro-cracks
Mechanical performance of self-healing fiber-metal laminates under transverse loading [Volume 5, Issue 2, 2018, Pages 185-190]
Microhardness
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Microhardness
Investigation the mechanical and microstructural propreties of copper surface composite Cu/SiO2 fabricated by friction stir processing [Volume 4, Issue 4, 2017, Pages 426-433]
Micromechanical analysis
Prediction and control of the mechanical properties of braided composite by controlling the braid angle using the micro-mechanical relationships for each of the flat faces of mandrel [Volume 5, Issue 4, 2018, Pages 595-604]
Micromechanical model
A developed micromechanical model to predict electrical properties of polymer nanocomposites containing carbon nanotubes [Volume 9, Issue 2, 2022, Pages 1961-1969]
Micromechanic Model
Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
Micromechanics
Micromechanics modeling and experimental characterization of shape memory alloy short wires reinforced composites [Volume 2, Issue 1, 2015, Pages 1-6]
Micromechanics
Simulated nano-indentation method for estimation of micro-residual stresses of a unidirectional composite ply [Volume 2, Issue 4, 2015, Pages 1-12]
Micromechanics
Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
Micromechanics
Micromechanical fracture modeling of unidirectional composite material under transverse loading [Volume 3, Issue 1, 2016, Pages 93-106]
Micromechanics
Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
Micromechanics
Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
Micromechanics
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Micromechanics
Micromechanical analysis of electro-elastic response of polymer composites reinforced with fuzzy fiber containing CNTs [Volume 5, Issue 4, 2018, Pages 485-498]
Microstructural characterization
Evaluation of the water absorption content effect on the dielectric properties and tensile strength of polymer composites [Volume 6, Issue 2, 2019, Pages 300-309]
Microstructure
Fabrication of A5083/SiC surface composite by friction stir processing and its characterization [Volume 2, Issue 4, 2015, Pages 31-36]
Microstructure
Effect of milling time on microstructural characteristics of Mg-20 %vol SiC composite produced by mechanical milling [Volume 4, Issue 2, 2017, Pages 135-140]
Microstructure
Investigation of mechanical properties, fracturgeraphi and microstructure of layered Al/Cu composite produced by cold roll bonding [Volume 4, Issue 3, 2017, Pages 311-318]
Microstructure
Studying influence of adding carbon and boron amount on microstructure and hardness of iron – based hardfacing layer using Flux Cored Arc Welding [Volume 5, Issue 2, 2018, Pages 245-252]
Microstructure
Effect of Er addition on the microstructural characteristics and compressive behavior of insitu Al-15 wt.% Mg2Si composites [Volume 6, Issue 2, 2019, Pages 242-247]
Microstructure
Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method [Volume 6, Issue 3, 2019, Pages 335-342]
Microstructure
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Microstructure
Effect of carbonaceous hybrid reinforcement and extrusion temperature on the microstructure and mechanical properties of AA7075 matrix hybrid composite prepared by semi-solid casting [Volume 8, Issue 1, 2021, Pages 1339-1352]
Microstructure
Design and manufacturing of Al-Mg2Si cylindrical functionally graded composites using in-situ centrifugal casting [Volume 8, Issue 4, 2021, Pages 1749-1757]
Microvascular channels
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2019, Pages 503-510]
Minimum resultant error
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Mixed accumulative roll bonding process
The investigation and comparison of mechanical propertise and microstructure Al/CNT and Al/CNT/Al2O3 copmosites produced by mixed accumulative roll bounding [Volume 4, Issue 4, 2017, Pages 464-470]
Mixed adhesive
Assessment of mixed adhesive in single lap and peel joint with composite substrate [Volume 4, Issue 2, 2017, Pages 189-194]
Mixed mode I/II loading
A novel approximate method for determining mixed mode I/II bridging law of laminated composites [Volume 8, Issue 4, 2021, Pages 1836-1848]
Modal test
Experimental and numerical methods for free vibration analysis of sandwich conical shells with anisogrid composite lattice core [(Articles in Press)]
Mode I
Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
Mode I fracture toughness and Fracture energy
The use of Taguchi method for mix-design optimization of polymer concrete with high resistance against mode I crack growth [Volume 9, Issue 1, 2022, Pages 1892-1885]
Modeling
Modeling of Degree of Cure in Epoxy-glass Prepreg [Volume 1, Issue 2, 2014, Pages 43-48]
Modeling
Numerical modeling of bending behavior of intra-ply hybrid composites using finite element method [Volume 2, Issue 4, 2015, Pages 59-66]
Modeling
Simple finite element modeling of planar composite structures using digital image processing technique in Matlab [Volume 3, Issue 2, 2016, Pages 195-202]
Modified arcan device
Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
Modified dimensional analysis
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Modified Higher-order theory
Parametric impact analysis on cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 9, Issue 4, 2022, Pages 2099-2115]
Mod I Fracture
Experimental investigation of the effect of different surface treatment on mode I fracture behavior of composite/aluminum adhesive joint [Volume 9, Issue 4, 2022, Pages 2116-2127]
Molecular Dynamics Simulation
The effect of Inconel 625 value on mechanical and tribological properties of PTFE-based composites: Experimental and molecular dynamics simulation studies [Volume 8, Issue 4, 2021, Pages 1797-1805]
Monte Carlo method
Monte Carlo simulation and determination of gamma ray protection characteristics of composites containing Bismuth Oxide and elements of Gadolinium, Titanium, Tungsten, Zirconium, Zinc and Yttrium [(Articles in Press)]
Montmorilonite
Preparation and optimization of Chitosan-Montmorillonite nanocomposite formulations containing Curcumin [Volume 7, Issue 1, 2020, Pages 714-722]
Morphology
Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
Morphology
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
MS criterion
Experimental and theoretical fracture analysis of quasi-brittle polymer components containing V-notches with end holes under combined tensile-shear loading [Volume 2, Issue 2, 2015, Pages 41-54]
MTS criterion
Experimental and theoretical fracture analysis of quasi-brittle polymer components containing V-notches with end holes under combined tensile-shear loading [Volume 2, Issue 2, 2015, Pages 41-54]
Multi Domain Generalized Differential Quadrature (GDQ)
Using a Multi Domain Generalized Differential Quadrature Method to Study the Effect of Crack on the Vibrational Behavior of Composite Cylindrical Shell [Volume 8, Issue 4, 2021, Pages 1749-1760]
Multi-functional sandwich panel
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Multi-Layer Composite Vessel
Analytical solution for stresses in the spherical shell of a thin-wall composite multi-layer vessel under internal pressure by using the classical theory of shells [Volume 10, Issue 3, 2023, Pages 2297-2311]
Multi-layered Armor
A numerical analysis on effect of impedance and thickness of various layers on deflection of target plate in layered armor systems under explosive loading [Volume 1, Issue 2, 2014, Pages 11-20]
Multi-layer hyperelastic plates
Nonlinear bending analysis of multi-layer hyperelastic silicon-rubber plates using meshless based on radial basis functions [Volume 8, Issue 1, 2021, Pages 1387-1396]
Multilayer pipes
Inspection of Multilayer Pipes Using Torsional Guided Waves [Volume 8, Issue 2, 2021, Pages 1603-1611]
Multi-objective optimization
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Multiobjective Optimization
Oblique crashworthiness optimization and sensitivity analysis of tapered sandwich columns [Volume 4, Issue 1, 2017, Pages 25-34]
Multiple Linear Regression
Presenting an explicit relation for analyzing stress of plates with quasi-square holes and under tension by using multiple linear regression [Volume 6, Issue 1, 2019, Pages 21-30]
Multi Scale Damage Modeling
Matrix Cracking and Induced Delamination in Symmetrically Laminated Composites Subjected to Static Loading by using Multi Scale Damage Mechanics [Volume 4, Issue 1, 2017, Pages 9-24]
Multi-scale finite element
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2021, Pages 1642-1632]
Multiscale grid composite
A study on the flexural response of grid composites containing multi-walled carbon nanotubes [Volume 4, Issue 1, 2017, Pages 101-108]
Multiscale model
Effect of GNPs debonding on mode I fracture toughness of polymeric nanocomposites [Volume 10, Issue 2, 2023, Pages 2233-2241]
Multiscales composite
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Multi-Walled Carbon Nanotube
Study on the mechanical behavior and morphology of ABS/TPU/CNT nanocomposites [Volume 7, Issue 3, 2020, Pages 1040-1046]
Multi walled carbon nanotubes
A study on the flexural response of grid composites containing multi-walled carbon nanotubes [Volume 4, Issue 1, 2017, Pages 101-108]
Multi-walled carbon nanotubes
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2015, Pages 37-44]
Multi-walled carbon nanotubes
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2018, Pages 539-550]
Multi-walled carbon nanotubes
The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration [Volume 6, Issue 4, 2019, Pages 533-540]
N
Nano-CaCO3
Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
Nano-carbonate calcium
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
Nano clay
Effect of nano clay addition to energy absorption capacity of steel-polyurea bi-layer [Volume 3, Issue 2, 2016, Pages 157-164]
Nano clay
Effect of methylene diphenyl diisocyanate and maleic anhydride grafted polypropylene on morphology and physical-mechanical properties of polyethylene based wood-plastic composites containing nanosilica and nanoclay [(Articles in Press)]
Nanoclay
The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
Nanoclay
Evaluation of impact strength of composites and fiber metal laminates hybridized with nanoclay after exposure to high temperature thermal shock [Volume 4, Issue 3, 2017, Pages 263-274]
Nanoclay
Mechanical behavior of nanoperlite/nanoclay hybrid nanocomposites based on polyethylene: Experimental and numerical validation of hyperelastic models [Volume 6, Issue 2, 2019, Pages 283-293]
Nanoclay
Experimental study of the compression behavior of Graphene Oxide and Nano-clay reinforced polycarbonate nanocomposites at low strain rates [Volume 6, Issue 3, 2019, Pages 427-434]
Nanoclay
Experimental investigation of FML reinforced nanoclay under high velocity impact of steel spherical projectile [Volume 7, Issue 1, 2020, Pages 753-760]
Nanoclay particles
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2019, Pages 525-532]
Nanocompoiste coating
Self-cleaning properties and free surface energy of ethylene vinyl acetate (EVA) nanocomposite coatings reinforced with silica nanoparticles [Volume 8, Issue 3, 2021, Pages 1736-1726]
Nano-composite
Effect of graphene oxide reinforcement on the ballistic properties of Al6061-GO nanocomposite [Volume 6, Issue 3, 2019, Pages 401-410]
Nano-composite
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
Nanocomposite
Investigating the physical and surface properties at high temperature of the Al/SiC nanocomposite produced by powder metallurgy [Volume 2, Issue 1, 2015, Pages 33-40]
Nanocomposite
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Nanocomposite
Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
Nanocomposite
Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2016, Pages 419-428]
Nanocomposite
Experimental and numerical analysis of composite lattice truncated conical structures with and without carbon nanotube reinforcements under axial compressive force [Volume 4, Issue 4, 2017, Pages 418-425]
Nanocomposite
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
Nanocomposite
Investigation of mechanical properties of polypropylene-based hybrid nanocomposites using experimental design [Volume 5, Issue 3, 2018, Pages 307-314]
Nanocomposite
A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers [Volume 5, Issue 3, 2018, Pages 325-330]
Nanocomposite
Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene [Volume 5, Issue 3, 2018, Pages 451-456]
Nanocomposite
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
Nanocomposite
Preparation of magnetic polyaniline nanocomposite and study its application for the removal of dibenzothiophene [Volume 6, Issue 2, 2019, Pages 294-299]
Nanocomposite
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Nanocomposite
Synthesis, characterization and application of mesoporous silica/maghemite nanocomposite in removal of heavy metal ions from aqueous solution [Volume 7, Issue 3, 2020, Pages 1013-1020]
Nanocomposite
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Nanocomposite
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Nanocomposite
Experimental study on the mechanical properties, morphology and fluidity of ABS/PBT/CNT nanocomposites [Volume 7, Issue 4, 2020, Pages 1189-1196]
Nanocomposite
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
Nanocomposite
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Nanocomposite
Effect of perlite nanoparticles addition on the mechanical and microstructure properties of PP/NR blend fabricated by melt mixing processing: Optimizing by Response Surface Approach [Volume 9, Issue 4, 2022, Pages 2089-2098]
Nanocomposite adhesive
Deleterious Effects of Seawater, acidic water and Alkali water on Mechanical Properties of Nanocomposite adhesives [Volume 9, Issue 1, 2022, Pages 1936-1927]
Nanocomposite analytical
A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene (PP/LLDPE) blends [Volume 4, Issue 4, 2017, Pages 386-390]
Nanocomposite coatings
The structure and corrosion properties of polyester-clay nanocomposite coatings and effect of curing on coatings properties [Volume 3, Issue 1, 2016, Pages 51-58]
Nanocomposites
Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
Nanocomposites
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2018, Pages 539-550]
Nanocomposites
Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes [Volume 8, Issue 1, 2021, Pages 1453-1460]
Nanocomposites
Investigating effect of Nano-additives orientations on buckling strength of polymeric Nanocomposite plates reinforced by CNT and Nanoclay [Volume 8, Issue 2, 2021, Pages 1590-1602]
Nanocomposites
Experimental analysis of impact strength, tensile strength and elastic modulus of polyamide 6 / polyolefin elastomer / carbon nanotubes / carbon nanotubes [Volume 8, Issue 3, 2021, Pages 1676-1668]
Nanocomposites
Life cycle estimation of notched polymer base dental composites reinforced with nanoparticles [Volume 9, Issue 2, 2022, Pages 1983-1989]
Nano Fe2O3
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
Nano fiber
A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers [Volume 5, Issue 3, 2018, Pages 325-330]
Nano graphene
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Nano graphene
An experimental study of the effects of carbon nanotube and graphene addition on the impact strength of Epoxy/Basalt fiber composite [Volume 6, Issue 3, 2019, Pages 411-418]
Nanographene
Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene [Volume 5, Issue 3, 2018, Pages 451-456]
Nanoparticles distribution
Investigating effect of Nano-additives orientations on buckling strength of polymeric Nanocomposite plates reinforced by CNT and Nanoclay [Volume 8, Issue 2, 2021, Pages 1590-1602]
Nano-plate
Analytical solution for free vibration of functionally graded carbon nanotubes (FG-CNT) reinforced double-layered nano-plates resting on elastic medium [Volume 2, Issue 3, 2015, Pages 55-66]
Nanoplate
Free vibrations analaysis of functionally graded composite rectangular na-noplate based on nonlocal exponential shear deformation theory in thermal environment [Volume 4, Issue 1, 2017, Pages 109-120]
Nano silica
Exprimental investigation on effect of functionalized nano silica and nano graphene on basalt fibers-epoxy composite under high velocity impact [Volume 7, Issue 1, 2020, Pages 675-682]
Nano silica
An investigation of impact resistance of sandwich panel with basalt skin and basalt/Kevlar hybrid skin with nano silica [Volume 7, Issue 4, 2020, Pages 1145-1152]
Nano silica
Self-cleaning properties and free surface energy of ethylene vinyl acetate (EVA) nanocomposite coatings reinforced with silica nanoparticles [Volume 8, Issue 3, 2021, Pages 1736-1726]
Nano silica
Effect of methylene diphenyl diisocyanate and maleic anhydride grafted polypropylene on morphology and physical-mechanical properties of polyethylene based wood-plastic composites containing nanosilica and nanoclay [(Articles in Press)]
Nanosilica
Study of the influence of temperature and nanosilica on curing behavior and cure kinetics modelling of an epoxy resin system [Volume 3, Issue 4, 2016, Pages 351-358]
Nano-silica particles
The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
Nanotube length
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Nanowire
Preparation of Fe-Mn nanowire alloys and the study of the effect of manganese content, annealing and electrodeposition frequency on their magnetic properties [Volume 4, Issue 3, 2017, Pages 255-262]
Nanozirconia
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Nano ZnO
Preparation and properties investigation of conductive Polyaniline-Zinc Oxide nanocomposites [Volume 2, Issue 1, 2015, Pages 7-12]
Natural fibers
Mechanical properties of laminated composites reinforced by natural fibers of cotton, wool and kenaf under tensile, flexural and shear loadings [Volume 6, Issue 1, 2019, Pages 99-108]
Natural fibers
Application of cotton/epoxy laminated composites to fabricate the uni- and bi-directional cosine corrugated cores sandwich panels [Volume 7, Issue 2, 2020, Pages 863-872]
Natural kenaf fiber
Energy absorption of polyester/kenaf fiber/carbon black hybrid composites affected by fibers aspect ratio [Volume 8, Issue 4, 2021, Pages 1861-1871]
Natural rubber
Effect of perlite nanoparticles addition on the mechanical and microstructure properties of PP/NR blend fabricated by melt mixing processing: Optimizing by Response Surface Approach [Volume 9, Issue 4, 2022, Pages 2089-2098]
Negative Poisson's ratio
Free vibration analysis of rectangular doubly curved auxetic-core sandwich panels integrated with CNT-reinforced composite layers using Galerkin method [Volume 8, Issue 3, 2021, Pages 1686-1677]
Nickel alumina nanocomposites
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Nickel Titanium wires
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Ni particle
Evaluation of mechanical properties and microstructure for Al/Ni %5 produced by cross accumulative roll bonding process [Volume 5, Issue 2, 2018, Pages 279-288]
Nitinol
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Nitinol
Effect of Nitinol Addition on the Mechanical properties and the Microstructure of Nactural Hydroxyapatite Obtained from Calf Femoral Bone [Volume 5, Issue 2, 2018, Pages 238-244]
Noise
Increasing robustness of solution versus noise for identifying delamination damage in composite plates using a hybrid method [Volume 4, Issue 2, 2017, Pages 125-134]
Non-classical effect
Static and dynamic analysis of composite thin walled beam with curvilinear fiber [Volume 6, Issue 1, 2019, Pages 79-88]
Nonisothermal
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
Nonlinear FEM
Experimental and numerical investigation of the energy absorption capability of the bi-material lattice structure [Volume 9, Issue 2, 2022, Pages 1976-1982]
Nonlinear Forced Vibration
Effect of damping on nonlinear forced vibration response of graphene-based nanocomposites [Volume 4, Issue 2, 2017, Pages 141-150]
Nonlinear Forced Vibration
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Nonlinear heat conduction
Exact solution of steady nonlinear heat conduction in exponentially graded cylindrical and spherical shells with temperature-dependent properties [Volume 3, Issue 3, 2016, Pages 301-306]
Nucleate sandwich panels
Experimental study of bond strength between core and composite layers under tensile and shear loads in different methods of fabricating nucleate composite structures [Volume 8, Issue 3, 2021, Pages 1667-1659]
Numerical analysis
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Numerical Modeling
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2018, Pages 511-520]
Numerical solution techniques
Modeling of Degree of Cure in Epoxy-glass Prepreg [Volume 1, Issue 2, 2014, Pages 43-48]
O
Oil well cement
Extraction of Mechanical Properties of Carbon Nanotubes in water Based Polymer latex for Application in Petroleum Well Cementing [Volume 8, Issue 4, 2021, Pages 1758-1766]
Open-cell structure
Investigation of cell wall thickness and impact strength of polypropylene microcellular nanocomposite foams produced by batch process [Volume 5, Issue 1, 2018, Pages 135-142]
Optimal digital control
Robust vibration control of a functionally graded beam with a variable cross section [Volume 2, Issue 2, 2015, Pages 17-30]
Optimization
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Optimization
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Optimization of Loading Path
Optimization of internal Pressure and Axial Feed in Metal composite Al-Cu Tubes Hydroforming Process with Genetic Algorithm [Volume 4, Issue 3, 2017, Pages 275-282]
Optimum mix-design
The use of Taguchi method for mix-design optimization of polymer concrete with high resistance against mode I crack growth [Volume 9, Issue 1, 2022, Pages 1892-1885]
Organic substances
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Organo- Clay
A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers [Volume 5, Issue 3, 2018, Pages 325-330]
Orientation
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Orthogonal and symmetric multi-layer plate
Experimental and Numerical Investigation of Effects of Stiffener in Buckling Resistance of square laminated composites with Circular Hole [Volume 6, Issue 1, 2019, Pages 43-52]
Oxidized Polyacrylonitrile Fibers
Hybridization effect of fibers reinforcement on tensile properties of epoxy composites [Volume 1, Issue 2, 2014, Pages 21-28]
P
PA6/ABS
Experimental studies on morphology and impact behavior of PA6/ABS/CaCO3 nanocomposites [Volume 3, Issue 1, 2016, Pages 43-50]
Pairwise comparison
Comparison of flexural strength in rectangular shape 3D-printed PLA samples with different grooves [Volume 10, Issue 2, 2023, Pages 2210-2217]
Partially debonded
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Peel strength
A Study of layer strength in composite Al 1050/SS 316 manufactured by Accumulative Roll bonding process [Volume 5, Issue 4, 2018, Pages 479-484]
Pentagonal Cutout
Determination of Optimal Parameters for Orthotropic Plates with Pentagonal Cutout by Imperialist Competitive Algorithm [Volume 4, Issue 2, 2017, Pages 161-170]
Percolation threshold
A developed micromechanical model to predict electrical properties of polymer nanocomposites containing carbon nanotubes [Volume 9, Issue 2, 2022, Pages 1961-1969]
Perforated Plates
Determination of Optimal Parameters for Orthotropic Plates with Pentagonal Cutout by Imperialist Competitive Algorithm [Volume 4, Issue 2, 2017, Pages 161-170]
Perlite
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
Perlite
Effect of perlite nanoparticles addition on the mechanical and microstructure properties of PP/NR blend fabricated by melt mixing processing: Optimizing by Response Surface Approach [Volume 9, Issue 4, 2022, Pages 2089-2098]
Phase analysis
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Piezoelectric
Micromechanical analysis of electro-elastic response of polymer composites reinforced with fuzzy fiber containing CNTs [Volume 5, Issue 4, 2018, Pages 485-498]
Piezoelectric
Energy Harvesting from Laminated Composite Beam with a Piezoelectric Layer under Forced Vibrations [Volume 5, Issue 2, 2018, Pages 227-237]
Piezoelectric patches
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Plastic deformation
Experimental and numerical analysis of impact on curved steel- polyurea bi-layer panels [Volume 3, Issue 3, 2016, Pages 207-214]
PMMA
Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene [Volume 5, Issue 3, 2018, Pages 451-456]
Pocket wavelet transform
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Poisson’s ratio
A correction factor to improve Poisson’s ratio prediction of 2D auxetic structure using finite element analysis and experiment [Volume 8, Issue 2, 2021, Pages 1556-1562]
Polarization
Production of uniform nanocomposite coating of polypyrrole carbon nanotube/ cadmium oxide to protect corrosion of austenitic stainless steel 304 [Volume 5, Issue 3, 2018, Pages 377-386]
Polarization Curves
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
Polyacrylonitrile Fibers
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Polyamide
Experimental Analysis of Mechanical Properties of Nanocomposites Based on Poly amide 6/ EPDM /Carbon Nanotubes [Volume 8, Issue 1, 2021, Pages 1453-1460]
Polyamide
Experimental analysis of impact strength, tensile strength and elastic modulus of polyamide 6 / polyolefin elastomer / carbon nanotubes / carbon nanotubes [Volume 8, Issue 3, 2021, Pages 1676-1668]
Polyamide 6
Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
Polyamide 6
Experimental study of microstructure, thermal and mechanical properties of PA6/NBR nanocomposites reinforced with graphene nanoparticle [Volume 6, Issue 3, 2019, Pages 419-426]
Polyamide 6
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
Polyamide 6
Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with Silicon carbide nanoparticles [Volume 8, Issue 4, 2021, Pages 1789-1796]
Polyamide 6/Elastomer
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Polyamide 6 glass fiber
Investigating the strength of the ultrasonic welding of the polyamide 6 continuous fiber glass composite [Volume 10, Issue 1, 2023, Pages 2176-2183]
Polyaniline
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Polyaniline based
Preparation and properties investigation of conductive Polyaniline-Zinc Oxide nanocomposites [Volume 2, Issue 1, 2015, Pages 7-12]
Polycarbonate
Experimental study of the compression behavior of Graphene Oxide and Nano-clay reinforced polycarbonate nanocomposites at low strain rates [Volume 6, Issue 3, 2019, Pages 427-434]
Polyethylene
Feasibility of using lead-acid battery separators as additives in polyethylene composites [Volume 9, Issue 4, 2022, Pages 2075-2082]
Polyethylene fibers
The effect of carbon nanotubes on high velocity impact behavior of hybrid Kevlar- ultrahigh molecular weight polyethylene fibers composite with interlayer configuration [Volume 6, Issue 4, 2019, Pages 533-540]
Polylactic Acid/Chitosan
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Polymer
Experimental investigation of mechanical properties of injected polymeric nanocomposites containing multi-walled carbon nanotubes according to design of experiments [Volume 2, Issue 3, 2015, Pages 67-74]
Polymer
Polyethylene/ethylene-vinyl acetate copolymer/nanoclay nanocomposite foams with two concurrent phase transitions in continuous extrusion process: Effects of material and processing parameters [Volume 7, Issue 3, 2020, Pages 989-999]
Polymer composite
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2019, Pages 503-510]
Polymer composites
Analysis of tensile failure mode and the mechanism dominated over polymer composite degradation [Volume 6, Issue 4, 2019, Pages 601-608]
Polymeric composites
Experimental investigation of creep behavior in Phenolic based polymer composites [Volume 1, Issue 2, 2014, Pages 37-42]
Polymeric foam
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2015, Pages 37-44]
Polymeric material
Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
Polymeric Nanocomposite
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Polymer matrix composite
A review on healing and mechanical behaviors of self-healable polymer matrix composites by extrinsic healing methods [Volume 6, Issue 4, 2019, Pages 549-570]
Polymer matrix composite
Effect of Steel Fibers on Wear Mechanism of Semi-Metallic Brake Pad Composite [Volume 7, Issue 1, 2020, Pages 791-799]
Polymer matrix composite
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Polymer matrix composite
Study of cyclic behavior, displacement-controlled low-cycle fatigue lifetime and failure in open-hole polymer-matrix composite reinforced by carbon fibers under various loading rates and amplitudes [Volume 8, Issue 1, 2021, Pages 1373-1386]
Polymer-matrix composites
Study of the zirconia particles incorporation effects on the wear resistance and hardness of polytetrafluoroethylene [Volume 6, Issue 4, 2019, Pages 649-656]
Polymer matrix Composites
Investigating the effect of modified silica fume on the mechanical behavior of basalt fibers-epoxy composites under bending and tensile loading [Volume 10, Issue 2, 2023, Pages 2218-2224]
Polymer nanocomposite
Multiscale modeling of fracture in polymer nanocomposite reinforced by intact and functionalized CNTs [Volume 4, Issue 1, 2017, Pages 35-46]
Polymethylmethacrylate
Life cycle estimation of notched polymer base dental composites reinforced with nanoparticles [Volume 9, Issue 2, 2022, Pages 1983-1989]
Polynomial chaos expansion
Reliability analysis based on polynomial chaos expansion method in composite structures [Volume 6, Issue 4, 2019, Pages 627-636]
Polynomial chaos expansion
Uncertainty quantification of natural frequencies of flax/epoxy composite laminates based on a polynomial chaos expansion method [Volume 8, Issue 1, 2021, Pages 1327-1338]
Polypropylene
Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears [Volume 3, Issue 2, 2016, Pages 147-156]
Polypropylene
Experimental analysis of graphene nanoparticles and glass fibers effect on mechanical and thermal properties of polypropylene/EPDM based nanocomposites [Volume 5, Issue 2, 2018, Pages 169-176]
Polypropylene
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate) [Volume 5, Issue 1, 2018, Pages 127-134]
Polypropylene
Investigation of mechanical properties of polypropylene-based hybrid nanocomposites using experimental design [Volume 5, Issue 3, 2018, Pages 307-314]
Polypropylene
Experimental analysis of tensile properties nanocomposites based on polypropylene/ Carboxylated Nitrile Rubber /Silica nano powder by using response surface methodology [Volume 6, Issue 2, 2019, Pages 275-282]
Polypropylene
Effect of perlite nanoparticles addition on the mechanical and microstructure properties of PP/NR blend fabricated by melt mixing processing: Optimizing by Response Surface Approach [Volume 9, Issue 4, 2022, Pages 2089-2098]
Polypropylene Nanocomposites
Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
Polypyrrole & morphology
Production of uniform nanocomposite coating of polypyrrole carbon nanotube/ cadmium oxide to protect corrosion of austenitic stainless steel 304 [Volume 5, Issue 3, 2018, Pages 377-386]
Polystyrene/nanosilica nanocomposites
Experimental Investigation on the Foaming Dynamics and Cell Microstructure of Polystyrene/Nanosilica/n-Pentane Nanocomposites [Volume 5, Issue 2, 2018, Pages 289-301]
Polytetrafluoroethylene
Study of the zirconia particles incorporation effects on the wear resistance and hardness of polytetrafluoroethylene [Volume 6, Issue 4, 2019, Pages 649-656]
Polyurethane foam
Isocyanate modification of rice husk for using in polyurethane foam composite [Volume 9, Issue 4, 2022, Pages 2083-2088]
Polyvinyl alcohol
A Study on morphology of Poly(vinyl alcohol)- organoclay nanocomposite nanofibers [Volume 5, Issue 3, 2018, Pages 325-330]
Polyvinyl Butyral
Improvement of delamination resistance of glass-phenolic composites through matrix toughening mechanism using poly (vinyl butyral) [Volume 5, Issue 4, 2018, Pages 521-528]
Porosity
The effects of SiC particles on the microstructure and hardness of cold sprayed Al-SiC composite coating [Volume 6, Issue 3, 2019, Pages 385-392]
Porosity
The effects of Al2O3 particles on the microstructure and hardness of cold sprayed Al-Al2O3 composite coating [Volume 6, Issue 3, 2019, Pages 473-480]
Porosity
Vibration analysis of truncated conical sandwich shell with porous FG core in different thermal loading [Volume 7, Issue 1, 2020, Pages 694-704]
Porosity
Investigating the effect of the shot peening process on the properties and quality of Al-Al2O3 composite coating created by cold spraying [Volume 9, Issue 3, 2022, Pages 2006-2010]
Porous FG-Beam
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Post-buckling
Post-buckling analysis of anti-symmetric cross-ply composite plates under end-shortening [Volume 2, Issue 3, 2015, Pages 35-42]
Post-buckling
Post buckling behavior analysis of unidirectional saddle shaped composite panels containing delaminations using cohesive zone modeling [Volume 6, Issue 2, 2019, Pages 255-264]
Powder metal
Modified hot pressing method for fabrication of ceramic matrix composites [Volume 3, Issue 2, 2016, Pages 139-146]
Powder Metallurgy
Fabrication of FGM sheet of aluminum matrix composite using powder metallurgy and hot-rolling processes [Volume 6, Issue 1, 2019, Pages 69-78]
Powder Metallurgy
Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method [Volume 6, Issue 3, 2019, Pages 335-342]
Preheating Temperature
Effect of preheating temperature on thickness and interfacial microstructure of Aluminum-Copper bimetallic composite produced by vertical centrifugal casting [Volume 4, Issue 4, 2017, Pages 391-398]
Prepreg
Modeling of Degree of Cure in Epoxy-glass Prepreg [Volume 1, Issue 2, 2014, Pages 43-48]
Prepregs
Investigation of thermoplastic pultrusion for tubular product production using prepregs [Volume 2, Issue 1, 2015, Pages 23-32]
Pre-strain
Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
Pre-strain
Experimental investigation of the effect of shape memory alloy wire embedding on the low-velocity impact behavior of fiber metal laminates composites at different temperatures [Volume 7, Issue 3, 2020, Pages 1057-1063]
Probability of Failure
Reliability analysis of the delamination onset and growth due to the matrix cracking in general composite laminates [Volume 8, Issue 1, 2021, Pages 1397-1410]
Progressive damage modeling
Progressive damage modeling of laminated composites by considering simultaneous effects of interlaminar and intralaminar damage mechanisms [Volume 2, Issue 2, 2015, Pages 1-8]
Progressive failure
Evaluation of variation in the mechanical properties of composite laminates using progressive failure analysis [Volume 5, Issue 1, 2018, Pages 51-60]
Progressive failure
Three dimensional modeling of progressive damage in fiber reinforced materials base on invariant failure criteria [Volume 5, Issue 2, 2018, Pages 191-199]
Proper orthogonal decomposition
Robust vibration control of a functionally graded beam with a variable cross section [Volume 2, Issue 2, 2015, Pages 17-30]
Pseudo-ductility
Effects of stacking sequence of fibers and thermal environments on the flexural properties of the basalt fibers/thin-ply unidirectional carbon fibers/epoxy hybrid composites [Volume 8, Issue 2, 2021, Pages 1514-1521]
PTFE composite
The effect of Inconel 625 value on mechanical and tribological properties of PTFE-based composites: Experimental and molecular dynamics simulation studies [Volume 8, Issue 4, 2021, Pages 1797-1805]
Pullout behavior
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2020, Pages 1255-1262]
Pull-out force
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2021, Pages 1642-1632]
Pulse electrodepostion
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Pulse phase thermography
Experimental and Numerical Simulation of Thermography for Detection of Disbond in Repaired Aluminum by Composite Patch [Volume 6, Issue 4, 2019, Pages 591-600]
Pultrusion
Investigation of thermoplastic pultrusion for tubular product production using prepregs [Volume 2, Issue 1, 2015, Pages 23-32]
Pultrusion
Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
Pultrusion
Visualization of Flow & Void In pultrusion Process of thermoplastic composites [Volume 4, Issue 4, 2017, Pages 453-463]
Punch shear
Experimental investigation of the effect effective of factors and parameters on the punch on the properties of quasi-static punching shear the glass/epoxy composite [Volume 2, Issue 4, 2015, Pages 13-22]
Pure aluminum
Study of microstructure and investigation of mechanical properties of pure aluminum-graphene nanocomposite using ball mill method in casting process with mechanical and electromagnetic stirring [Volume 8, Issue 2, 2021, Pages 1532-1542]
Q
Q-factor
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
Quasi-Square Hole
Presenting an explicit relation for analyzing stress of plates with quasi-square holes and under tension by using multiple linear regression [Volume 6, Issue 1, 2019, Pages 21-30]
Quasi-static test
The effect of graphene nanoparticles on the strength of sandwich panel structure under quasi-static loading and low-velocity impact [Volume 9, Issue 3, 2022, Pages 1994-2005]
R
Radar absorber
Synthesis of polyaniline/zinc-cobalt ferrite nanocomposites and their use in the preparation of radar absorber coatings [Volume 7, Issue 1, 2020, Pages 761-767]
Radar Absorbing Materials
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
Radar Cross Section
Design and Develpoment of Polymer Based Composite in Order to Minimize the RCS [Volume 7, Issue 3, 2020, Pages 1047-1056]
Radome
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Radome
Investigation of tensile strength and dielectric constant of GFRP composite [Volume 8, Issue 3, 2021, Pages 1714-1708]
Rayleigh-Ritz
Investigation of attached mass effect on flutter speed of cantilever composite plate in supersonic flow [Volume 4, Issue 2, 2017, Pages 179-188]
Rayleigh–Ritz
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
R-curve effect
Determination of cohesive zone parameters in mode I delamination growth of a double cantilever beam specimen using inverse method [Volume 4, Issue 1, 2017, Pages 83-90]
Reactive composites
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2021, Pages 1817-1825]
Rectangular plate
Dynamic response of FG rectangular plate in contact with stationary fluid under moving load [Volume 6, Issue 2, 2019, Pages 213-224]
Recycled poly (ethylene terephthalate)
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate) [Volume 5, Issue 1, 2018, Pages 127-134]
Recycling
Feasibility of using lead-acid battery separators as additives in polyethylene composites [Volume 9, Issue 4, 2022, Pages 2075-2082]
Reduced Mechanical Properties
Matrix Cracking and Induced Delamination in Symmetrically Laminated Composites Subjected to Static Loading by using Multi Scale Damage Mechanics [Volume 4, Issue 1, 2017, Pages 9-24]
Refractive index
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
Reliability
Reliability analysis of the delamination onset and growth due to the matrix cracking in general composite laminates [Volume 8, Issue 1, 2021, Pages 1397-1410]
Reliability analysis
Reliability analysis based on polynomial chaos expansion method in composite structures [Volume 6, Issue 4, 2019, Pages 627-636]
Representative volume element
Exact micromechanical stress analysis of long fiber composites under uniform tensile loading [Volume 2, Issue 3, 2015, Pages 1-10]
Representative volume element
Three-dimensional residual stresses analysis of nanocomposite polymeric matrix based on fiber reinforced carbon nanotubes [Volume 2, Issue 4, 2015, Pages 23-30]
Representative volume element
Micromechanical study of fibre- matrix debonding and matrix cracking using cohesive zone model and extended finite element method [Volume 3, Issue 1, 2016, Pages 21-30]
Representative volume element
Investigating effect of Nano-additives orientations on buckling strength of polymeric Nanocomposite plates reinforced by CNT and Nanoclay [Volume 8, Issue 2, 2021, Pages 1590-1602]
Residual strength
Experimental and Numerical Study of Residual Strength of Composite Grid Stiffened Cylindrical Shells Under Sequential Compressive Axial Load [Volume 8, Issue 2, 2021, Pages 1503-1513]
Residual strength
Deleterious Effects of Seawater, acidic water and Alkali water on Mechanical Properties of Nanocomposite adhesives [Volume 9, Issue 1, 2022, Pages 1936-1927]
Residual stresses
Three-dimensional residual stresses analysis of nanocomposite polymeric matrix based on fiber reinforced carbon nanotubes [Volume 2, Issue 4, 2015, Pages 23-30]
Response surface method
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Response surface methodology
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate): part Ⅱ, Constrained Optimization [Volume 6, Issue 1, 2019, Pages 119-126]
Response surface methodology
Experimental analysis of tensile properties nanocomposites based on polypropylene/ Carboxylated Nitrile Rubber /Silica nano powder by using response surface methodology [Volume 6, Issue 2, 2019, Pages 275-282]
Response surface methodology
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Response surface methodology
Modeling and optimization of mechanical properties of PA6/NBR nanocomposite reinforced with perlite nanoparticle [Volume 8, Issue 1, 2021, Pages 1421-1430]
Response surface methodology
Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with Silicon carbide nanoparticles [Volume 8, Issue 4, 2021, Pages 1789-1796]
Response surface methodology
Effect of perlite nanoparticles addition on the mechanical and microstructure properties of PP/NR blend fabricated by melt mixing processing: Optimizing by Response Surface Approach [Volume 9, Issue 4, 2022, Pages 2089-2098]
Reverse step
Strength improvement of composite-steel lap joint by grading the joint area with carbon and glass fiber and also mechanical interference by reverse step [Volume 6, Issue 3, 2019, Pages 393-400]
Rib
Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
Rice husk
Isocyanate modification of rice husk for using in polyurethane foam composite [Volume 9, Issue 4, 2022, Pages 2083-2088]
Rigid cylindrical punch
Sliding contact between a rigid cylindrical punch and a functionally graded semi-infinite medium in the presence of a surface crack [Volume 2, Issue 3, 2015, Pages 11-22]
Ritz
Ultimate strength analysis of imperfect composite plates under both in-plane compressive load and lateral pressure using Ritz method [Volume 5, Issue 1, 2018, Pages 1-10]
Riveted joint
Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive- riveted joints [Volume 2, Issue 2, 2015, Pages 71-78]
Riveted Joints
Experimental and Numerical Study of the Effect of Environmental Conditions on the Tensile Strength of Adhesive, Riveted and Hybrid Joints of E-Glass/Epoxy Composites [Volume 10, Issue 3, 2023, Pages 2273-2296]
Robust control
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
Rotary ultrasonic machining
Study of the effect of machining parameters on delamination in rotary ultrasonic machining process of glass fiber reinforced polymer composite by diamond core tool [Volume 4, Issue 1, 2017, Pages 67-74]
Rotating disc
Creep Analysis of FGM Rotating Disc with non-Uniform Profiles [Volume 1, Issue 2, 2014, Pages 29-36]
Rotating piezoelectric cylinder
Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
Roughness
Experimental investigation of surface finishing in cracked aluminum plates reinforced by composite patch under fatigue loading [Volume 7, Issue 4, 2020, Pages 1171-1176]
S
S-2 glass/sc15 epoxy composite
Finite element simulation of Hopkinson compression test to investigate the dynamic behavior of composite materials [Volume 7, Issue 4, 2020, Pages 1263-1270]
Sandwich beam
Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
Sandwich beam
Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
Sandwich composite
Experimental investigation of charpy impact in energy absorption of hybrid and non-hybrid sandwich structures reinforced with carbon nanofiber [Volume 9, Issue 1, 2022, Pages 1920-1912]
Sandwich conical shell
A novel smeared method for investigating the free vibrations of sandwich conical shells with lattice cores [Volume 7, Issue 4, 2020, Pages 1163-1170]
Sandwich conical shell
Global buckling load calculation of the of sandwich conical shells with lattice cores subjected to axial compression loading using a novel smeared method [Volume 7, Issue 4, 2020, Pages 1217-1226]
Sandwich conical shell
Experimental and numerical methods for free vibration analysis of sandwich conical shells with anisogrid composite lattice core [(Articles in Press)]
Sandwich Panel Composite
Applying acoustic emission to investigate failure mechanisms on bending of polymer-based composite sandwich panels [Volume 7, Issue 3, 2020, Pages 1029-1039]
Sandwich Panels
Introducing novel sandwich panels based on of cork/polyurethane foam hybrid core and composite grid structure for marine applications [Volume 7, Issue 3, 2020, Pages 1064-1075]
Sandwich plates
Free vibration analysis of sandwich plates with magnetorheological smart fluid core by Using modified shear deformation theory [Volume 8, Issue 4, 2021, Pages 1826-1835]
Sandwich shell
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2018, Pages 469-478]
Sandwich shell
Resistance of Singly-Curved Sandwich Shells with Metal Microlattice Core under Transverse Loading [Volume 7, Issue 2, 2020, Pages 897-906]
Sandwich structures
Comparison of moisture aging effect on flexural and buckling behavior of two types of balsa core sandwich structures [Volume 8, Issue 4, 2021, Pages 1767-1779]
Scan electron microscope
Investigation of high-temperature strength of composite joint Hastelloy X - AISI 304L manufactured by laser welding [Volume 7, Issue 1, 2020, Pages 800-807]
Scanning electron microscopy
Failure mechanisms in open-hole laminated composites under tensile loading using acoustic emission [Volume 5, Issue 1, 2018, Pages 143-152]
Schapery integral model
The effects of fiber angle and temperature on the distribution of long-term stress and creep strain for unidirectional multilayer composite cylinder [Volume 3, Issue 3, 2016, Pages 233-242]
Self-cleaning
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
Self-cleaning
Self-cleaning properties and free surface energy of ethylene vinyl acetate (EVA) nanocomposite coatings reinforced with silica nanoparticles [Volume 8, Issue 3, 2021, Pages 1736-1726]
Self- healable materials
A review on healing and mechanical behaviors of self-healable polymer matrix composites by extrinsic healing methods [Volume 6, Issue 4, 2019, Pages 549-570]
Self-healing
Experimental Investigation of Dynamic Behavior of Composite Sandwich Panel Using Self-healing Materials under CHARPY impact and 3-point Bending Destruction [Volume 4, Issue 4, 2017, Pages 434-442]
Self-healing
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Self-healing
Mechanical performance of self-healing fiber-metal laminates under transverse loading [Volume 5, Issue 2, 2018, Pages 185-190]
Self-healing
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2019, Pages 503-510]
Self-healing
A numerical study on crack closure using a combination of self-healing microcapsules and shape memory alloy wires [Volume 8, Issue 4, 2021, Pages 1806-1816]
Self-healing phenomenon
Mechanical properties of carbon fibers/epoxy composite containing anhydride self-healing material under transverse loading [Volume 3, Issue 3, 2016, Pages 285-290]
Self-healing phenomenon
Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers [Volume 4, Issue 4, 2017, Pages 399-404]
Self-healing phenomenon
Experimental Study of the mechanical behavior of self-healing polymer composite under heating cycles [Volume 6, Issue 2, 2019, Pages 183-189]
Self-healing polymer
A review of recent studies on self-healing smart composites for application in dentistry [Volume 6, Issue 3, 2019, Pages 435-450]
Self-progressive synthesis
Production and characterization of Cobalt/Vanadium Boride composite powder by mechanochemical method and acid leaching [Volume 4, Issue 1, 2017, Pages 75-82]
SEM
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2015, Pages 37-44]
Semi-cylindrical Lattice
Experimental and numerical study of the buckling of semi-cylindrical composite lattice [Volume 3, Issue 3, 2016, Pages 269-276]
Semi-empirical model
A semi-empirical model to predict the low-velocity impact behavior of weft-knitted spacer fabrics reinforced composites [Volume 5, Issue 1, 2018, Pages 117-126]
Sensitivity analysis
Oblique crashworthiness optimization and sensitivity analysis of tapered sandwich columns [Volume 4, Issue 1, 2017, Pages 25-34]
Sensitivity analysis
Acoustic scattering from helically wounded fiber reinforced composite cylindrical shells:
Resonance isolation, identification and classification
and bifurcation phenomenon [Volume 6, Issue 1, 2019, Pages 167-178]
Sequential compressive axial load
Experimental and Numerical Study of Residual Strength of Composite Grid Stiffened Cylindrical Shells Under Sequential Compressive Axial Load [Volume 8, Issue 2, 2021, Pages 1503-1513]
Shape memory alloy
Micromechanics modeling and experimental characterization of shape memory alloy short wires reinforced composites [Volume 2, Issue 1, 2015, Pages 1-6]
Shape memory alloy
Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
Shape memory alloy
Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires [Volume 4, Issue 4, 2017, Pages 363-374]
Shape memory alloy
An Experimental investigation on nitinol shape memory alloy reinforced GLAREs against Charpy low velocity impact [Volume 5, Issue 3, 2018, Pages 403-414]
Shape memory alloy
The effect of Shape memory wire on the ballistic behavior of smart corrugated core sandwich panels [Volume 8, Issue 2, 2021, Pages 1612-1627]
Shape memory alloy
Tensile properties of flexible latex-based composites reinforced by cotton fibers in the presence of shape memory alloys [Volume 8, Issue 4, 2021, Pages 1780-1788]
Shape memory alloy
A numerical study on crack closure using a combination of self-healing microcapsules and shape memory alloy wires [Volume 8, Issue 4, 2021, Pages 1806-1816]
Shape memory alloy fibers
Finite Element Analysis of the Adhesive behavior of Shape Memory Alloy fiber and Polymer Concrete [Volume 7, Issue 4, 2020, Pages 1255-1262]
Shape Memory Alloys
An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment [Volume 5, Issue 4, 2018, Pages 551-564]
Shape memory alloy wires
Frequency analysis of SMA composite beam resting on Pasternak elastic foundation using four engineering beam theories [Volume 3, Issue 1, 2016, Pages 73-84]
Shape memory polymers
A review on 4D printing of polymers and polymer composites [Volume 10, Issue 1, 2023, Pages 2147-2165]
Shear Mixing
Investigating the mechanical behavior and microstructure of basalt fibers-aluminum composite fabricated by thixomixing method [Volume 10, Issue 1, 2023, Pages 2184-2192]
Shear properties
Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
Shear strength
Effect of CTBN liquid rubber and flexible diamine curing agent on epoxy/glass prepregs properties [Volume 5, Issue 1, 2018, Pages 25-32]
Shear strength
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
Shear strength
A Study of layer strength in composite Al 1050/SS 316 manufactured by Accumulative Roll bonding process [Volume 5, Issue 4, 2018, Pages 479-484]
Shot peening
Investigating the effect of the shot peening process on the properties and quality of Al-Al2O3 composite coating created by cold spraying [Volume 9, Issue 3, 2022, Pages 2006-2010]
Shot peening
Investigating the effects of shot peening and Polycaprolactone (PCL) electrospinning surface treatments on the corrosion properties of Mg-2.5٪HA biocomposite [Volume 10, Issue 3, 2023, Pages 2266-2272]
SiC
Effect of milling time on microstructural characteristics of Mg-20 %vol SiC composite produced by mechanical milling [Volume 4, Issue 2, 2017, Pages 135-140]
SiC nanoparticles
Investigation of the microstructure and hardness of cast Al7068 nanocomposite reinforced with SiC nanoparticles [Volume 5, Issue 4, 2018, Pages 461-468]
Silica fume
Investigating the effect of modified silica fume on the mechanical behavior of basalt fibers-epoxy composites under bending and tensile loading [Volume 10, Issue 2, 2023, Pages 2218-2224]
Silica nano particles
Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
Silica Nanoparticles
Effects of size and structure of silica nanoparticles on morphology and tensile behavior of flexible nanocomposite foams based on polyurethane [Volume 5, Issue 4, 2018, Pages 615-620]
Silica nano powder
Experimental analysis of tensile properties nanocomposites based on polypropylene/ Carboxylated Nitrile Rubber /Silica nano powder by using response surface methodology [Volume 6, Issue 2, 2019, Pages 275-282]
Silicon Carbide
Experimental and mathematical investigation of mechanical and microstructural properties of PA6/NBR nanocomposite reinforced with Silicon carbide nanoparticles [Volume 8, Issue 4, 2021, Pages 1789-1796]
Simple shear extrusion
Experimental investigation of mechanical properties, corrosion and biocompatibility of Ti/RGO composite made by the combined method of spark plasma sintering and simple shear extrusion [Volume 9, Issue 1, 2022, Pages 1926-1921]
Simulated indentation composites
Simulated nano-indentation method for estimation of micro-residual stresses of a unidirectional composite ply [Volume 2, Issue 4, 2015, Pages 1-12]
Single Edge Notched Bending (SENB)
The use of Taguchi method for mix-design optimization of polymer concrete with high resistance against mode I crack growth [Volume 9, Issue 1, 2022, Pages 1892-1885]
Single-lap composite joint
Investigation of the effect of adding carbon nanofibers on the improvement of the mechanical properties of single-lap composite bolted joints [Volume 9, Issue 1, 2022, Pages 1884-1876]
Single Lap Joint
The Effects of Temperature Level and Stress-to-Strength Ratio on Creep Behavior of Aluminum-Aluminum Single Lap Adhesive Joints [Volume 5, Issue 3, 2018, Pages 353-358]
Sintering
Compression and impact strength study of aluminum-alumina granule composite by squeez-casting method [Volume 5, Issue 3, 2018, Pages 387-394]
Sintering
Influence of nanostructured FeAl powder addition on mechanical properties of WC composites produced by Spark plasma sintering technique [Volume 6, Issue 2, 2019, Pages 225-233]
Sizing
Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite transverse mechanical properties [Volume 6, Issue 4, 2019, Pages 511-524]
Skin/Stringer
Failure analysis of composite wing adhesive joints using 3D cohesive interface element [Volume 2, Issue 2, 2015, Pages 31-40]
Smart Attached Mass
Effect Of Dimensions Smart Attached Mass And Local Stiffness On Dynamic Response Of Thick Plates [Volume 4, Issue 4, 2017, Pages 443-452]
Smart composite Face-sheet
The effect of Shape memory wire on the ballistic behavior of smart corrugated core sandwich panels [Volume 8, Issue 2, 2021, Pages 1612-1627]
Smart composite material
Effect Of Dimensions Smart Attached Mass And Local Stiffness On Dynamic Response Of Thick Plates [Volume 4, Issue 4, 2017, Pages 443-452]
Smart polymeric nanocomposite
Vibration analysis of boron nitride-reinforced nanocomposites embedded in elastic medium considering surface and electric field effects by using higher-order modified strain gradient theory [Volume 6, Issue 1, 2019, Pages 31-42]
Smart window
Design and Characterization of Thermal and Optical Properties of Nano-Composite Self-Cleaning Refractive Transparent-Opaque Smart Window [Volume 8, Issue 2, 2021, Pages 1479-1493]
SMA wires
Dynamic response of composite sandwich plates reinforced by SMA wires under low-velocity impact, based on a new higher-order hyperbolic global–local theory [Volume 6, Issue 1, 2019, Pages 127-142]
Snail
Experimental investigation of impact properties of cell structures patterned from animal shells [Volume 10, Issue 2, 2023, Pages 2225-2232]
Sol-gel
Improvement in the mechanical properties of polyester nanocomposite with nano-silica prepared by sol-gel method [Volume 3, Issue 4, 2016, Pages 419-428]
Sol-gel
Preparation of SiO2/TiO2 ceramic nano composite coating by sol-gel method on carbon steel and study the properties of it against corrosive ion in treated wastewater [Volume 5, Issue 1, 2018, Pages 33-40]
Sorbent
Preparation of magnetic polyaniline nanocomposite and study its application for the removal of dibenzothiophene [Volume 6, Issue 2, 2019, Pages 294-299]
Sound transmission loss
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
Spans rate and indenter geometry
Experimental investigation of the effect effective of factors and parameters on the punch on the properties of quasi-static punching shear the glass/epoxy composite [Volume 2, Issue 4, 2015, Pages 13-22]
Spark plasma sintering
Experimental investigation of mechanical properties, corrosion and biocompatibility of Ti/RGO composite made by the combined method of spark plasma sintering and simple shear extrusion [Volume 9, Issue 1, 2022, Pages 1926-1921]
Sparse grid collocation
Reliability analysis based on polynomial chaos expansion method in composite structures [Volume 6, Issue 4, 2019, Pages 627-636]
SPD
Evaluation of mechanical properties and microstructure for Al/Ni %5 produced by cross accumulative roll bonding process [Volume 5, Issue 2, 2018, Pages 279-288]
Specific Perforation Energy
Experimental and numerical investigation of high velocity impact resistance in fiber metal laminates [Volume 5, Issue 1, 2018, Pages 99-108]
Spherical Shell
Analytical solution for stresses in the spherical shell of a thin-wall composite multi-layer vessel under internal pressure by using the classical theory of shells [Volume 10, Issue 3, 2023, Pages 2297-2311]
Stability map
Parametric investigation of dynamics of beams made of FG material with longitudinal and whirling movements exposed to axial forces [Volume 7, Issue 4, 2020, Pages 1177-1188]
Stabilization
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Stacking sequence fibers
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
State space method
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
Static Bending
Free Vibration and Static Bending Analysis of Curved Sandwich Panel with Magneto-Rheological Fluid Layer in Sheets using Improved High Order Sandwich Panel Theory [Volume 1, Issue 2, 2014, Pages 49-62]
Static Buckling
An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment [Volume 5, Issue 4, 2018, Pages 551-564]
Statistical-experimental analysis
Statistical-experimental analysis of the effect of fabrication parameters on the strength of composite grid-stiffened cylinders under compressive axial load [Volume 8, Issue 2, 2021, Pages 1543-1555]
Steel microfibers
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2021, Pages 1642-1632]
Steel-silicon carbide
Study of microstructure and tribological behavior of the composite layer produced of silicon carbide particles on a steel ASTM A106 GTAW welding method [Volume 2, Issue 1, 2015, Pages 65-72]
Step Graded Adhesive Zone
Numerical and experimental analysis of dynamical behavior of composite T-joint with step wise graded adhesive zone based on functional behavior model [Volume 4, Issue 3, 2017, Pages 319-326]
Stiffness degradation
Fatigue life prediction of laminated composites under multiaxial fatigue loading condition by using developed continuum damage mechanics model [Volume 3, Issue 3, 2016, Pages 215-224]
Stimulus
A review on 4D printing of polymers and polymer composites [Volume 10, Issue 1, 2023, Pages 2147-2165]
Stir casting
Production and characterization of in-situ Al-Mn-Al2O3 composite produced in Al-MnO2 system [Volume 3, Issue 3, 2016, Pages 277-284]
Stir casting
Investigation of the microstructure and hardness of cast Al7068 nanocomposite reinforced with SiC nanoparticles [Volume 5, Issue 4, 2018, Pages 461-468]
Stir casting
Investigation of the Effect of Graphene Nano Plates and Carbon Nanotubes on the Improvement of Mechanical Properties of Aluminum Matrix Nanocomposites [Volume 7, Issue 4, 2020, Pages 1197-1206]
Strain energy
Increasing robustness of solution versus noise for identifying delamination damage in composite plates using a hybrid method [Volume 4, Issue 2, 2017, Pages 125-134]
Strain energy
Evaluation the energy release rate of induced delamination due to matrix cracking in symmetric composite laminate [Volume 6, Issue 1, 2019, Pages 53-68]
Strain energy release rate
Analytical prediction of mode I strain energy release rate at crack growth initiation of polymeric nanocomposites [Volume 3, Issue 1, 2016, Pages 1-10]
Strain energy release rate
Development of a layer-wise model together with J-integral method for prediction of interlaminar crack growth in laminated composites plates [Volume 5, Issue 2, 2018, Pages 218-226]
Strain Rate
Experimental investigation of the effect effective of factors and parameters on the punch on the properties of quasi-static punching shear the glass/epoxy composite [Volume 2, Issue 4, 2015, Pages 13-22]
Strain Rate
Dynamic constitutive-micromechanical model to predict dynamic shear behavior of glass/epoxy composites [Volume 3, Issue 3, 2016, Pages 291-300]
Strain Rate
Mechanical properties of multifunctional composite structures with z-pin core using numerical simulation of Hopkinson pressure bar test device [Volume 7, Issue 1, 2020, Pages 683-693]
Strain rate dependency
Effect of loading rate on the mechanical behavior of glass fiber and glass
fiber/polymer composites [Volume 8, Issue 1, 2021, Pages 1283-1306]
Strain Rate Dependent Properties
Numerical investigation of the effect of material strain rate dependent properties on high velocity impact behavior and ballistic limit velocity of honeycomb structures [Volume 5, Issue 4, 2018, Pages 511-520]
Strength
Investigation of the effect of material and geometrical parameters affecting the strength of hybrid adhesive- riveted joints [Volume 2, Issue 2, 2015, Pages 71-78]
Strength
Experimental study and optimization of effective drilling parameters
on fibers glass–epoxy composite [Volume 8, Issue 1, 2021, Pages 1411-1420]
Strengthening mechanisms
Study of strengthening mechanisms in an Al-Cu-Ti metallic glass reinforced Al matrix composite consolidated by ECAP process [Volume 4, Issue 2, 2017, Pages 171-178]
Strength improvement
Strength improvement by mean of adherend notching and adherend taper in the adhesive single lap joints [Volume 7, Issue 2, 2020, Pages 941-948]
Strength-weight
Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
Stress
Effect of stress on the of chemical reactions during special polyacrylonitrile fibers stabilization as a heat-resistant material in polymeric composites [Volume 7, Issue 3, 2020, Pages 973-980]
Stress Concentration Factor
Presenting an explicit relation for analyzing stress of plates with quasi-square holes and under tension by using multiple linear regression [Volume 6, Issue 1, 2019, Pages 21-30]
Stress relaxation test
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
Stress-strain curve
Investigation of nanotubes’ length and their agglomeration effects on the elastoplastic behavior of polymer-based nanocomposites [Volume 4, Issue 2, 2017, Pages 229-240]
Stress transfer
Micromechanics of stress transfer through the interphase in pull out test of fiber through the resin [Volume 4, Issue 3, 2017, Pages 283-294]
Structural health monitoring
Utilization of artificial neural networks for detection and classification of damages in composite plate-like structures via ultrasonic guided waves [Volume 5, Issue 3, 2018, Pages 343-352]
Superelastic
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Superelastic
An investigation on the static buckling behavior of laminated cylindrical composite shells with embedded SMA wires by experiment [Volume 5, Issue 4, 2018, Pages 551-564]
Surface composite
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2018, Pages 575-582]
Surface composite
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Surface modification
Effect of Surface Modification of Graphene Nanoplatelets on the High Velocity Impact Behavior of Basalt Fibers Reinforced Polymer-Based Composites [Volume 5, Issue 1, 2018, Pages 109-116]
Surface modification
An investigation on the flexural performance of basalt fibers-epoxy hybrid composites reinforced with nanoclay particles [Volume 6, Issue 4, 2019, Pages 525-532]
Surface modification
Improvement in interlaminar shear strength and flexural properties of carbon fiber/epoxy composite using surface-modified carbonate calcium [Volume 6, Issue 3, 2019, Pages 343-350]
Surface modification
The effect of modified zirconia nanoparticles on the mechanical response of basalt fibers- epoxy composite under tensile loading [Volume 7, Issue 2, 2020, Pages 891-896]
Surface modification
Investigating the effect of modified silica fume on the mechanical behavior of basalt fibers-epoxy composites under bending and tensile loading [Volume 10, Issue 2, 2023, Pages 2218-2224]
Surface modified silica
An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
Surface nanocomposite
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Surface nano composites
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Surface quality
Study of tool flank wear and surface quality in milling of Al520-MMCs reinforced with SiC and Sn particles [Volume 9, Issue 2, 2022, Pages 1970-1975]
Surface roughness
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Surface roughness
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Surface roughness
Study the effects of cutting speed and Cryogenic lubrication parameters on the surface roughness when milling A356-10%SiC [Volume 10, Issue 2, 2023, Pages 2242-2246]
Surface treatment
Effect of various surface treatment methods on the flexural properties of fiber metal laminates [Volume 6, Issue 4, 2019, Pages 495-502]
Surface treatment
Experimental investigation of the effect of different surface treatment on mode I fracture behavior of composite/aluminum adhesive joint [Volume 9, Issue 4, 2022, Pages 2116-2127]
Surface treatment
Investigating the effects of shot peening and Polycaprolactone (PCL) electrospinning surface treatments on the corrosion properties of Mg-2.5٪HA biocomposite [Volume 10, Issue 3, 2023, Pages 2266-2272]
Surface Waves
Acoustic scattering from helically wounded fiber reinforced composite cylindrical shells:
Resonance isolation, identification and classification
and bifurcation phenomenon [Volume 6, Issue 1, 2019, Pages 167-178]
T
Taguchi
An experimental investigation on tensile properties of self-healing metal matrix composite reinforced by superelastic NiTi wires using taguchi method [Volume 6, Issue 1, 2019, Pages 1-8]
Taguchi method
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2015, Pages 37-44]
Taguchi method
Experimental and Finite Element Investigation of Hot Gas Forming Process of A6063-AZ80 Bi-layered Composite Tubes using Taguchi Methods for Design of Experiments [Volume 5, Issue 1, 2018, Pages 79-90]
Taguchi method
Experimental and numerical free vibration analysis of composite sandwich cylindrical shells with lozenge cores [Volume 5, Issue 4, 2018, Pages 469-478]
Taguchi method
The use of Taguchi method for mix-design optimization of polymer concrete with high resistance against mode I crack growth [Volume 9, Issue 1, 2022, Pages 1892-1885]
Tapered Sandwich columns
Oblique crashworthiness optimization and sensitivity analysis of tapered sandwich columns [Volume 4, Issue 1, 2017, Pages 25-34]
Temperature
Creep strength of hybrid composites used in power transmission line conductors [Volume 7, Issue 4, 2020, Pages 1227-1234]
Temperature and time of curing
Investigation of curing time and temperature effects on mechanical properties and thermal degradation of artificial leather made of PVC [Volume 10, Issue 1, 2023, Pages 2132-2137]
Tensile and flexural tests
An experimental study on mechanical properties of epoxy/basalt/carbon nanotube composites under tensile and flexural loadings [Volume 3, Issue 2, 2016, Pages 187-194]
Tensile behavior
Experimental study of tensile behavior of self-healing fiber-metal laminates composites with chopped hollow glass fibers [Volume 4, Issue 4, 2017, Pages 399-404]
Tensile behavior
Effects of size and structure of silica nanoparticles on morphology and tensile behavior of flexible nanocomposite foams based on polyurethane [Volume 5, Issue 4, 2018, Pages 615-620]
Tensile loading
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Tensile modulus
The effect of curing temperature on fracture energy of nanosilica filled epoxy with different particle sizes [Volume 3, Issue 4, 2016, Pages 389-396]
Tensile strength
Experimental investigation of properties of polymeric nanocomposite foams containing multi-walled carbon nanotubes using Taguchi method [Volume 2, Issue 4, 2015, Pages 37-44]
Tensile strength
Effect of time on healing behavior of microvascular channels based self-healing E-glass fibers/epoxy composite under flexural and tensile loadings condition [Volume 6, Issue 4, 2019, Pages 503-510]
Tensile strength
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2018, Pages 539-550]
Tensile strength
Fabrication and mechanical characterization of Cu-Fe FGM produced by powder metallurgy method [Volume 6, Issue 3, 2019, Pages 335-342]
Tensile strength
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
Tensile strength
Modelling and optimization of parameters affecting the tensile strength and ductility of aluminum-based composite produced by FSA via RSM [Volume 7, Issue 4, 2020, Pages 1207-1216]
Tensile strength
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Tensile strength
Investigation of tensile strength and dielectric constant of GFRP composite [Volume 8, Issue 3, 2021, Pages 1714-1708]
Tensile strength
Experimental and Numerical Study of the Effect of Environmental Conditions on the Tensile Strength of Adhesive, Riveted and Hybrid Joints of E-Glass/Epoxy Composites [Volume 10, Issue 3, 2023, Pages 2273-2296]
Tensile test"
PROGRESSIVE DAMAGE ANALYSIS OF PLAIN WOVEN COMPOSITES UNDER TENSILE LOADING [Volume 6, Issue 4, 2019, Pages 609-614]
Tension
Tensile and flexural properties of epoxy-date palm fiber composites [Volume 5, Issue 1, 2018, Pages 69-78]
Textile reinforced concrete
Increasing the efficiency of carbon fiber bundles in reinforcing fine grained concrete: an experimental study of flexural bearing capacity [Volume 6, Issue 2, 2019, Pages 310-318]
Thermal Analysis
An investigation on the effect of atmosphere, degree of compacting, heating rate, and presence of diluent on the mechanism of evolutions occurred in the Al+B2O3+Si+WO3 aluminothermic System [Volume 7, Issue 2, 2020, Pages 917-930]
Thermal cycles
Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles [Volume 2, Issue 2, 2015, Pages 55-62]
Thermal cycling
Investigation the flexural behavior of fiber metal laminates containing glass and Kevlar fibers subjected to thermal cycling [Volume 7, Issue 3, 2020, Pages 981-988]
Thermal cycling
Investigation of thermal fatigue effects on crack propagation and mode I delamination of multilayer laminated composites using digital image correlation [Volume 8, Issue 3, 2021, Pages 1652-1643]
Thermal Energy Storage
Study of Co3O4-Al2O3 Composite Powder Synthesis Method on Specification and Thermal Energy Storage Capacity [Volume 7, Issue 4, 2020, Pages 1137-1144]
Thermal environment
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
Thermal environment
Free vibrations analaysis of functionally graded composite rectangular na-noplate based on nonlocal exponential shear deformation theory in thermal environment [Volume 4, Issue 1, 2017, Pages 109-120]
Thermal properties
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Thermal properties
The role of mechanical alloying time on the thermal and mechanical behavior of Al/Ni reactive composites [Volume 8, Issue 4, 2021, Pages 1817-1825]
Thermo-elastic model
Characterization of thermal cycles and investigation of thermal expansion behavior of the Al-4%Cu composite alloy reinforced by SiC particles [Volume 2, Issue 2, 2015, Pages 55-62]
Thermography
Experimental and Numerical Simulation of Thermography for Detection of Disbond in Repaired Aluminum by Composite Patch [Volume 6, Issue 4, 2019, Pages 591-600]
Thermomagnetic fields
Electromechanical response analysis of a rotating piezoelectric cylinder with functionally graded material under thermomagnetic fields [Volume 3, Issue 1, 2016, Pages 59-72]
Thermoplastic
Modeling of Impregnation in the Pultrusion of Thermoplastic Composites [Volume 3, Issue 1, 2016, Pages 31-42]
Thermoplastic
Visualization of Flow & Void In pultrusion Process of thermoplastic composites [Volume 4, Issue 4, 2017, Pages 453-463]
Thermoplastic elastomer
Experimental study of the effects of halloysite nanoparticles and acrylonitrile butadiene rubber elastomer on mechanical properties of PVC/NBR/HNT nanocomposites [Volume 8, Issue 2, 2021, Pages 1494-1502]
Thermoplastic pultrusion die
Investigation of thermoplastic pultrusion for tubular product production using prepregs [Volume 2, Issue 1, 2015, Pages 23-32]
Thin-Walled
Analytical solution for stresses in the spherical shell of a thin-wall composite multi-layer vessel under internal pressure by using the classical theory of shells [Volume 10, Issue 3, 2023, Pages 2297-2311]
Thin-walled Composite
Study of the surface roughness, material removal rate and deflection in thin-walled composite structures during the high speed machining process [Volume 7, Issue 3, 2020, Pages 1083-1094]
Thin walled composite beam
Static and dynamic analysis of composite thin walled beam with curvilinear fiber [Volume 6, Issue 1, 2019, Pages 79-88]
Three point bending
Experimental and numerical investigation of effect of shape of ribs on flexural behavior of curved composite sandwich panels with lattice core under [Volume 6, Issue 3, 2019, Pages 351-362]
Three-point bending
Experimental and numerical investigation of the effect of longitudinal and horizontal ribs on flexural behavior of grid stiffened composite plates [Volume 3, Issue 4, 2016, Pages 333-342]
Three-point bending
Three-point bending test of metal and composite sandwich panels with grid stiffened core [Volume 3, Issue 4, 2016, Pages 377-388]
Through-the-Thickness Crack
Using a Multi Domain Generalized Differential Quadrature Method to Study the Effect of Crack on the Vibrational Behavior of Composite Cylindrical Shell [Volume 8, Issue 4, 2021, Pages 1749-1760]
Ti-MMC
On the effects of cutting and lubrication parameters on the surface quality and cutting forces in machining Ti-MMC-Experimental and frequency assessment [Volume 6, Issue 1, 2019, Pages 143-150]
Tin-matrix Composites
Enhanced wear resistance of pure tin by addition of bronze and Fe-C reinforcing particles [Volume 7, Issue 2, 2020, Pages 873-880]
Titanium dioxide
A study on effect of titanium dioxide nanoparticles on the elastic modulus, impact and tensile strengths of polypropylene/linear low density polyethylene (PP/LLDPE) blends [Volume 4, Issue 4, 2017, Pages 386-390]
Titanium dioxide. Microstructure
Investigation of Tribological Properties of Nano-Composite Copper / Titanium Dioxide Alloy Produced Using Friction-Stir Process [Volume 9, Issue 4, 2022, Pages 2067-2074]
Titanium Oxide nanoparticles
The Study of The mechanical, Thermal and Antibacterial Properties of PLA/Chitosan/TiO2 nanocomposite film [Volume 7, Issue 1, 2020, Pages 747-752]
Titanium properties
New Hybrid Approach in Obtaining Plastic properties by Nanoindentation, Finite Element Method and Modified Dimensional Analysis [Volume 6, Issue 3, 2019, Pages 451-464]
Tool flank wear
Study of tool flank wear and surface quality in milling of Al520-MMCs reinforced with SiC and Sn particles [Volume 9, Issue 2, 2022, Pages 1970-1975]
Tool Wear
Study Tool wear in Cryogenic milling of A356-10%SiC [Volume 10, Issue 3, 2023, Pages 2251-2256]
Torsional guided waves
Inspection of Multilayer Pipes Using Torsional Guided Waves [Volume 8, Issue 2, 2021, Pages 1603-1611]
Total potential energy
Analytical modeling to predict dynamic response of Fiber-Metal Laminated Panel subjected to low velocity impact [Volume 5, Issue 3, 2018, Pages 331-342]
Toughening
Improvement of delamination resistance of glass-phenolic composites through matrix toughening mechanism using poly (vinyl butyral) [Volume 5, Issue 4, 2018, Pages 521-528]
Toughness
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2018, Pages 539-550]
Transfer matrix
Three-dimensional analysis of sound power transmission through thick laminated composite cylindrical shells [Volume 4, Issue 1, 2017, Pages 53-66]
Transient Loading
Numerical and experimental analysis of dynamical behavior of composite T-joint with step wise graded adhesive zone based on functional behavior model [Volume 4, Issue 3, 2017, Pages 319-326]
Transverse elastic modulus
Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite transverse mechanical properties [Volume 6, Issue 4, 2019, Pages 511-524]
Transverse loading
An experimental investigation into the effect of surface-modified silica nanoparticles on the mechanical behavior of E-glass/epoxy grid composite panels under transverse loading [Volume 3, Issue 1, 2016, Pages 11-20]
Transverse tensile strength
Numerical study of the effect of glass fiber sizing reinforcement by randomly distributed CNTs on the glass/epoxy composite transverse mechanical properties [Volume 6, Issue 4, 2019, Pages 511-524]
Trapezoidal Compound core
Experimental and numerical study of Energy Absorption in foam filled Trapezoidal Compound core sandwich panels subjected to quasi-static loading. [Volume 5, Issue 4, 2018, Pages 565-574]
Tribological Properties
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]
Tube
Experimental study of behavior of filament winding composite pipes with liner using glass fibers and silica nanoparticles under impact loading [Volume 3, Issue 4, 2016, Pages 311-320]
Tube hydroforming
An Investigation into the Comparison between Hot and Cold Forming of Copper-Aluminum Composite Tubes by utilizing Hydroforming and Gasforming Processes [Volume 4, Issue 2, 2017, Pages 205-218]
Tube hydroforming
Experimental Investigation and Integration of Finite Element Analysis and Response Surface Method to Multi-objective Optimization of Geometrical Factors in Bi-layered Al-Cu Tubes Hydroforming [Volume 7, Issue 1, 2020, Pages 661-674]
Tungsten carbide
Influence of nanostructured FeAl powder addition on mechanical properties of WC composites produced by Spark plasma sintering technique [Volume 6, Issue 2, 2019, Pages 225-233]
Tungsten Disulfide
Fabrication and investigation of properties of Al / WS2-CNT hybrid nanocomposites [Volume 7, Issue 3, 2020, Pages 1021-1028]
Turtle
Experimental investigation of impact properties of cell structures patterned from animal shells [Volume 10, Issue 2, 2023, Pages 2225-2232]
Two-phase nanocomposite
Mathematical modeling of mechanical properties of PA6/NBR/Clay Nanocomposites Fabrication using the Thermal Friction Stirs Processing [Volume 7, Issue 2, 2020, Pages 833-842]
U
Ultimate Strength
Ultimate strength analysis of imperfect composite plates under both in-plane compressive load and lateral pressure using Ritz method [Volume 5, Issue 1, 2018, Pages 1-10]
Ultra high performance concrete
Investigation of bonding behavior of steel ribbed rebar embedded in ultra-high performance concrete reinforced with steel microfiber using multi-scale finite element method [Volume 8, Issue 3, 2021, Pages 1642-1632]
Ultrasonic guided waves
Utilization of artificial neural networks for detection and classification of damages in composite plate-like structures via ultrasonic guided waves [Volume 5, Issue 3, 2018, Pages 343-352]
Ultrasonic treatment
Investigation of the microstructure and hardness of cast Al7068 nanocomposite reinforced with SiC nanoparticles [Volume 5, Issue 4, 2018, Pages 461-468]
Ultrasonic Welding
Investigating the strength of the ultrasonic welding of the polyamide 6 continuous fiber glass composite [Volume 10, Issue 1, 2023, Pages 2176-2183]
Ultrasound
Nondestructive evaluation of corrosion in pipes with composite coating with the finite element simulation of guided wave propagation [Volume 10, Issue 3, 2023, Pages 2312-2319]
Uncertainty Analysis
Reliability analysis based on polynomial chaos expansion method in composite structures [Volume 6, Issue 4, 2019, Pages 627-636]
Uncertainty quantification
Uncertainty quantification of natural frequencies of flax/epoxy composite laminates based on a polynomial chaos expansion method [Volume 8, Issue 1, 2021, Pages 1327-1338]
Unit Cell and Variational Approach
Prediction of damage propagation in cross-ply laminated composites subjected to uniaxial tensile loading [Volume 9, Issue 1, 2022, Pages 1911-1893]
Unwanted vibrations
Vibration suppression of MR sandwich beams based on fuzzy logic [Volume 3, Issue 4, 2016, Pages 359-368]
UPVC
Investigation on the Microstructure and Properties of PVC Toughened with DOP/PMMA/Nano-Graphene [Volume 5, Issue 3, 2018, Pages 451-456]
V
Vacuum infusion process
Fabrication of sandwich panels with glass/vinylester composite face-sheets and polyvinyl chloride (PVC) lattice core using vacuum infusion process for marine applications [Volume 10, Issue 1, 2023, Pages 2166-2175]
VCCT
Development of the Virtual Crack Closure Technique using Layer Wise theory for Delamination Propagation of a Composite Beam in Mode I [Volume 8, Issue 1, 2021, Pages 1443-1452]
Vibration
Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires [Volume 4, Issue 4, 2017, Pages 363-374]
Vibration
Experimental and numerical analysis of vibration of FML- stiffened circular cylindrical shell under clamp-free boundary condition [Volume 6, Issue 1, 2019, Pages 9-20]
Vibration
Using a Multi Domain Generalized Differential Quadrature Method to Study the Effect of Crack on the Vibrational Behavior of Composite Cylindrical Shell [Volume 8, Issue 4, 2021, Pages 1749-1760]
Vibrational behavior
Uncertainty quantification of natural frequencies of flax/epoxy composite laminates based on a polynomial chaos expansion method [Volume 8, Issue 1, 2021, Pages 1327-1338]
Vibration Analysis
Theoretical and experimental investigations of delamination effects on modal characteristics of symmetric cross-ply composite beams [Volume 3, Issue 2, 2016, Pages 177-186]
Vibration Analysis
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Vibration Control
Robust vibration control of a functionally graded cracked beam [Volume 2, Issue 1, 2015, Pages 41-52]
Vibration Control
Robust vibration control of a functionally graded beam with a variable cross section [Volume 2, Issue 2, 2015, Pages 17-30]
Vibration correlation technique
Prediction of the critical buckling load of composite cylindrical shells by using Vibration Correlation Technique [Volume 5, Issue 3, 2018, Pages 359-368]
Vibration correlation technique
Experimental Prediction of Buckling Load of Rectangular composite Plate with through-the-width Delamination using Nondestructive Vibration Correlation Technique [Volume 7, Issue 2, 2020, Pages 813-822]
Vibration of smart structures
Free vibration analysis of sandwich plates with magnetorheological smart fluid core by Using modified shear deformation theory [Volume 8, Issue 4, 2021, Pages 1826-1835]
Vibration Suppression
Vibration Suppression of Composite Plate Reinforced by CNTs On Elastic Foundation Using Active Control Method [Volume 7, Issue 4, 2020, Pages 1243-1254]
Vickers microhardness
Experimental, analytical and numerical investigation of polypropylene nanocomposites microhardness [Volume 3, Issue 2, 2016, Pages 165-176]
Viscoelastic behavior
Characterization of mixed-mode fracture toughness of viscoelastic ABS polymeric material by using modified Arcan set-up [Volume 3, Issue 2, 2016, Pages 131-138]
Viscoelastic behavior
Modeling creep in long fiber reinforced laminated composites using micromechanical rules [Volume 3, Issue 4, 2016, Pages 409-418]
Viscoelastic behavior
Finite element modeling and experimental investigation of the effect of fiber orientation on viscoelastic behavior of composite laminates reinforced with long fibers [Volume 6, Issue 2, 2019, Pages 248-254]
Viscoelastic material
Frequency dependent damped vibration of composite sandwich beam with viscoelastic and transverse flexible core based on GHM method [Volume 3, Issue 4, 2016, Pages 397-408]
V-notch with end hole
Experimental and theoretical fracture analysis of quasi-brittle polymer components containing V-notches with end holes under combined tensile-shear loading [Volume 2, Issue 2, 2015, Pages 41-54]
Vulcanization
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
VUMAT subroutines
Experimental and numerical analysis of low-velocity impact on composite sandwich panels with grid stiffened core [Volume 6, Issue 4, 2019, Pages 615-626]
W
Warp knitted spacer fabric
Experimental study of the impact properties of foam based composites reinforced with warp-knitted spacer fabric [Volume 8, Issue 1, 2021, Pages 1353-1362]
Water uptake
Deleterious Effects of Seawater, acidic water and Alkali water on Mechanical Properties of Nanocomposite adhesives [Volume 9, Issue 1, 2022, Pages 1936-1927]
Wavelet
Increasing robustness of solution versus noise for identifying delamination damage in composite plates using a hybrid method [Volume 4, Issue 2, 2017, Pages 125-134]
Wavelet transform
Utilization of artificial neural networks for detection and classification of damages in composite plate-like structures via ultrasonic guided waves [Volume 5, Issue 3, 2018, Pages 343-352]
Wavelet transform
Detection of Different Defects in Carbon Fiber Reinforced Polymer Matrix Laminated Composite under Tension by Vibration Analysis [Volume 6, Issue 3, 2019, Pages 373-384]
Weak interface bonding
Simulation of thermo-mechanical behavior of glass-epoxy composites containing shape memory alloy under static loading [Volume 3, Issue 2, 2016, Pages 111-122]
Wear
Investigations on microstructure, wear behavior and corrosion resistance of brass/graphite composite produced by friction stir processing [Volume 3, Issue 3, 2016, Pages 253-260]
Wear
Mechanical behavior of Ni-Al2O3 nanocomposite coatings electroplated in the precence of organic compounds [Volume 4, Issue 3, 2017, Pages 245-254]
Wear
Investigation the mechanical and microstructural propreties of copper surface composite Cu/SiO2 fabricated by friction stir processing [Volume 4, Issue 4, 2017, Pages 426-433]
Wear
Fabrication and investigation of microstructutr and mechanical properties of A356-TiO2-Gr surface Hybrid nano composite by friction stir processing [Volume 5, Issue 1, 2018, Pages 61-68]
Wear
Influence of nanostructured FeAl powder addition on mechanical properties of WC composites produced by Spark plasma sintering technique [Volume 6, Issue 2, 2019, Pages 225-233]
Wear
The effect of Inconel 625 value on mechanical and tribological properties of PTFE-based composites: Experimental and molecular dynamics simulation studies [Volume 8, Issue 4, 2021, Pages 1797-1805]
Wear
Investigation of Tribological Properties of Nano-Composite Copper / Titanium Dioxide Alloy Produced Using Friction-Stir Process [Volume 9, Issue 4, 2022, Pages 2067-2074]
Wear resistance
Study of the zirconia particles incorporation effects on the wear resistance and hardness of polytetrafluoroethylene [Volume 6, Issue 4, 2019, Pages 649-656]
Wear test
Fabrication of magnesium sheet with magnesium matrix surface composite to improve hardness and wear properties [Volume 5, Issue 4, 2018, Pages 575-582]
Wear test
Comparison of microstructure, wear resistance, and corrosion behavior of AZ31B/SiO2, AZ31B/graphite, and AZ31B/SiO2/graphite surface composite produced by friction stir processing (FSP) [Volume 7, Issue 1, 2020, Pages 705-713]
Weather radar
Design and measurement of the first Iranian sandwich Radome panel for C – band weather radar application [Volume 6, Issue 2, 2019, Pages 234-241]
Winkler Foundation
Developing homotopy perturbation method to investigate the nonlinear vibration of a Porous FG-Beam subjected to the external excitation [Volume 7, Issue 2, 2020, Pages 907-916]
Wood-plastic
Investigation of the physical and mechanical properties of Wood plastic composites based on high density polyethylene/ polypropylene/recycled poly (ethylene terephthalate) [Volume 5, Issue 1, 2018, Pages 127-134]
Workpiece thickness
Statistical study of the effect of various machining parameters on delamination in drilling of carbon fiber reinforced composites [Volume 5, Issue 1, 2018, Pages 41-50]
Woven carbon composite
Numerical investigation of tensile behavior of composite reinforced with woven carbon and Kevlar fabrics by multi scale method [Volume 5, Issue 2, 2018, Pages 265-270]
Woven Composite
An experimental investigation of the low velocity impact behavior of woven carbon-fiber-epoxy composites [Volume 6, Issue 4, 2019, Pages 571-580]
X
XNBR
Experimental investigation on mechanical properties of hybrid nano-composite based on epoxy/ graphene nano-platelets/ carboxylated acrylonitrile butadiene rubber [Volume 5, Issue 3, 2018, Pages 395-402]
Y
Young's modulus
Theoretical and experimental study on the effect of multi-walled carbon nanotubes on improving the tensile properties and toughness of Vinyl ester resin [Volume 5, Issue 4, 2018, Pages 539-550]
Young's modulus
Young modulus and longitudinal damping coefficient of the composite copper reinforced by carbon nanotubes [Volume 7, Issue 2, 2020, Pages 931-940]
Z
Zinc oxide
Curing kinetic of micro and nano composites based on styrenine butadiene rubber contains zinc oxide [Volume 5, Issue 2, 2018, Pages 253-264]
Zirconia
Study of the zirconia particles incorporation effects on the wear resistance and hardness of polytetrafluoroethylene [Volume 6, Issue 4, 2019, Pages 649-656]
Zn/ZnO Nanocomposite
Investigation of tribological properties of Zn/ZnO nanocomposite targets produced by cold spray process [Volume 7, Issue 2, 2020, Pages 823-832]